Search results

I picked up a stuck 8BA motor the other week and I'm in the process of taking it apart and seeing what I got. First the pistons are stuck real good, there may be one or two that will come out easy but most are stuck. I think I can deal with that part, the real problem is the valves, lifters and...

'59 ford truck transmission 4 speed with parking brake assy but not brake handle. $50 please no shipping

I have a '59 292 motor that may have come out of a truck and I'm having a hard time finding a ring gear for it, it uses a 11" clutch. I ordered one off of the internet and it was too small to expand over the flywheel. I have found another one at NAPA and they list the inside dia. After measuring...

I have a cruise-o-matic for sale from a 1965 Thunderbird w/390 complete with bellhousing, converter and flex plate. I have had it apart and it will need rebuild but ALL bushings, shafts and other hard parts are very good. It will need front band and front clutch frictions and steel plates, all...

Are the window regulators the same front and rear on a 1930 tudor? I'm using the same regulators front and rear and the rear glass does not want to go up straight, Just thinking that they may work better if the arm was longer on the rear.

So with any luck I will pick up a cruise-o-matic to replace my ford-o-matic in my Model A with a Y block saturday. I understand I will have to use the Y block bell housing and converter, also swapping the front pump. The cruise-o-matic came from behind a FE motor. Anything else? The...

I need the valve bodies for a '57 Ford-o-matic transmission. This is the three speed unit, cast iron case. Thanks.

Are the truck (large trucks) radiators larger than a "car" radiator? I know the shell is deeper but is the radiator core thicker? I have a car shell with what I think is a truck radiator, the upper shell mounting brackets that stick out to the rear are too long but the filler cap fits the shell...

Does anyone know if the valve body is the same in a water cooled '57 ford-o-matic and an air cooled ford-o-matic? I don't know what year the air cooled one is. Question goes for the main valve body and the smaller pressure regulator/converter valve body.

I found a set of ECZ-G heads for my Y block and plan on installing them in a few days. The question is, when I built the motor last year the directions that came with the head gaskets said to drill holes in the block that line up with the 1/4" or so holes in the gasket. these holes are above and...

I have been looking for a speedometer gear for a 1957 Ford-o-matic. Found one at Mac's but they don't say if it will fit the Ford-o-matic. They say it is a 19 tooth but that is about all. anyone know if this would be correct? Mac's # B5A-17322-CS THANKS

I did a search, did not find the answer. I'm mating a 292 Y block to a Ford-o-matic and bought the flex plate from Mac's, it came with shims/ spacers. I guess they are for positioning the converter correctly, what is the correct way to do this? where do the spacers go?

so I picked up a "new" set of guages for a '39 ford at a swap meet over the weekend. The problem is that the temp guade works but the liquid in the tube is not red, just clear. Is there something I can do or is it a lost cause? the guage in question is the tube type guage not the moving needle...

I have a cast iron Ford transmission that I think is a Cruise-o-matic, the Model # on the tag on the drivers side is PAZ-7003-AZ I did some searching on the WEB and found some info on ford trans ID. On this page it shows two differant type oval tags, one with red strips and one all just one...

WTB a flex plate for a ford-o-matic behind a 292 Y block. shipping to 21784

I have two magnito coil assemblies, one is the single row and the other is the double row, both have the oval coils. $20 each plus shipping. Send e-mail address for photos

'32 hood top panels in good shape $100 plus shipping, Send e-mail address for photos

1. set of front fenders 1930 rusty, patches at headlight bar area. Rusty running board area and edge bead just above wheel and apron area. front area is in good shape great for using for patches and could be repaired. pick up would be best, $100.00 for both. 2. hood rusty but not too bad...

First of all hello to all! I am glad to say that after 35 to 40 years of owning antique cars and trucks I may soon buy a Model A! Like I said, I may soon buy a model A, The problem is, the car has no title. The seller said the car came from New Jersey and he bought it with no title but has a...