Search results

This is a are bench seat from a 65 Falcon Ranchero. The seat is in fairly good condition. It has a couple of areas that will need some attention. It could be used the way it is for a while and recovered later. I believe that it complete with all its original parts including the seat tracks. Not...

This is a pair of Bucket Seats that came out of a 66 Falcon. The seats are complete with the tracks still in place. From what I understand these seat frames are the same that were used in 66-69 Ranchero, Fairlanes, Torinos, Falcons, and Comets. Most of the seat foam and upholstery for these...

1933-34 Ford parts These are some parts that I have saved to use on some 34 Ford projects that I'm no longer going to need. Hopefully there are some items you have been looking for or need to help finish a project. Some of these pieces are in really good condition and some are in need of a lot...

Parting out Ford car(1938-40) or truck (1938-41) frame and suspension parts. 1. Gas tank. $25 2. Front cross member (rivets drilled out/ original holes unmolested./ No cracks or breaks) $35 3. Front cross member U-bolts and bracket $20 4. Emergency Brake Handle. $25 5. Center unit for...

This is one of the NOS Cluster gears saved to rebuild some Model A transmissions. It doesn't have any Ford markings (not sure they ever did). It has been buried in the parts room for 25 to 40 years. I don't think Grandpa ever brought anything that wasn't USA made. I'm not a Model A specialist...

I'm moving some parts to storage left over from a 1938 Ford pickup project. I'm including a list of the parts. I haven't got any pictures, yet. Will post soon. If you see something you could use, hit me with an email and I'll make sure that you have the pictures and full description and the...

This is a Muncie auxiliary overdrive transmission that was saved for a project that is no longer going to be used. It has been in dry storage most of its life. I believe the it still has its original paint and shows very little wear. Everything shifts well and is well oiled. The Model number is...

I am trying to rebuild the front end and need to locate the original bushing for the spring perchs. I believe these are 1.75 X 3/4 in. The new spring I am using has the original bushing already installed. I will buy the whole set to be able to get the perch bushings. I'm trying to keep from...

Can anyone tell me if there is suppose to be any shims between the lower section of the spindle and kingpin where it matches up with the bottom part of the axle? The replacement kit I'm using didn't have any if that be the case. From some of the pictures of different kits, it looks like there...

The is an old working mechanical jack made by the Weaver Co. This jack dates back to the mid 1920s. It was called a Lo-Way, as it had a 6'' drop so as to be able to get under the balloon tires of old. It is all mechanical with all the levers, steerable front wheels, and pump action that made it...

This is an extra set of 37 Ford hubcaps. Could be used as is or 3 of these would be good candidates to be restored. Three of these are originals. One of the caps is different in that it has the center cap jointed to the rest of the cap as you can see in the last photo. It also looks like the...

I found this luggage box and wondering if anyone could help id.ing the maker, era, and possible models of cars that this might have been used on. It measurements are 36 x 14 x 20 inches. It is covered with a type of topping material and has a gold leaf/ painted pin stripe around the front. Most...

I know this is not a Model T horn, but it was bolted on top of the motor of a 25 T that I am currently working on. The more I look at it the more I'm thinking that it is more of a siren. It is very heavy. And there are no markings indicating model or manufacture. I've included a few pictures if...

Working on an old Ford. Needing to use some old Ford parts for a car. Want to know which are the best parts to look for and how to modify them. Knowing the right year for the best part to be using is going to save you a whle lot of trouble, grief, and money. I have the series of 6 booklets that...

What I have is a single Ford 16" 36 bent spoke wheel. It has been bead blasted and hasn't been primed yet. Because of that it has some light surface rust that will need to be cleaned off with some metal prep. I didn't want to prime it in case I might be power coating it. The wheel is very...

Does anyone have a diagram, photo, or drawing of how the wires, springs, or cables are attached to make the seat adjustment function. I have some of the pieces and can probably figure some thing out to make it work, but I would like to try and do it right the first time. Thanks for any help or...

Can anyone direct me to a material that they have used to help fill in missing sections of material in the metal tack strips I have for a coupe? My metal strips are very usable, but I need to replace some of the compound/ material that Henry used. I thought of using a silcone, but I don't know...

Trying to get my windshield frame ready to sent to the chromers. My question is should I try and remove the upper arms that attach to the hinges? I first thought these were held to the frame with 3 bolts, but I now see that they are also spot welded. Why? My original thought was I would like to...

I'm working on getting my dash finished and ready to reinstall. I'm wanting to install a glove box radio and like everything else I'm working with on this 34, everything is a basket case. I understand there is a cover that goes over the front of the radio, mine doesn't have one. I assume that it...

I'm in need of a couple of sections of the curved beaded edge (about a 2" square section) of a rear fender to try and repair a fender I'm working on. If you have an old fender that isn't worth rebuilding and want to sell part of the beaded edge I could use it. LMK what you have and what you want...