Search results

need a set of good arms and blades for a 46

what windsheild wiper blades and arms are you useing for the 46 Ford coupes?

Looking for a pair of complete parking lights------ have a pair of LED lights to trade or let me know how much

I had new exhaust put on my 29 coup. we run straight pipe all the way thru with the intention of installing the muffler when it arrives. I thought it would be obnoxiously loud but was surprised at the level of exhaust noise....it was not loud at all. the new muffler is on its way but until them...

the back left side of my A coup is tree holes for a brake light----when did they stop doing the three holes?

In the last week my 29 coup has been sticking in 2 gears at the same time. I have been lucky and worked it out and it will shift normal for a day or so and then it sticks again. Do I need to pull the trans. to fix this?

are there articles on installing a mag in place of the dist. I have several 4 acyl. mages that could possibly be adapted to work

I need across the top , across the middle , across the bottom an dia. corner to corner, Mine has been smacked at the bottom of the left side in the wheel well so I'm going to have to rebuild the braces and what ever else it takes to get it back to where it belongs. Any help is appreciated.

I have 29 A with new clutch disk, resurfaced flywheel and resurfaced pressure plate. It chatters when the clutch is released terribly. I know I'm going to have to pull it apart again just confused what might fix it. Before tearing it down it shifted perfect I thought while I got it apart I would...

what thickness should the setting cork or tape be for a 29 coup windshield.

when are they installed? I'm going to put the body on tomorrow and need to know when the blocks are installed, while the body is lowered or after by raising and inserting one at a time.

I've been searching for 3 days trying to find a part number that I can take to NAPA to order the rear hub seal on a 29 A coup..is there such a thing ? I found interchange No.s for the bearings but come up blank. Yes I looked in the Les books and the judging standards but don't have the rest of...

I've spent 2 hours looking for a number for a seal in the rear drum. I need a number that I can order from NAPA or any other parts supplier. I'm beginning to think there is no modern seal that is a fit for this.

looking for a handle for the passenger side door on a 29 coup. It don't have to be really nice just serviceable as this is for a driver. Key not important.

I'm lookin for the bracket that was used on 28 and early 29 drum tail lights. the one that uses the 3 holes in the lower left of the body.

is the cable itself something I can make? what length are they for a 29 coup?

Need a 29 rad. in the area of Portland or Salem-----503 706 35eight three

when I took my coup apart it seems it is a bunch of mismatched parts, early shocks on the front and later on the back ,28 frame under a 29, fender braces were different, 31 motor , late transmission, mixed cast and steel brake drums, 31 steering wheel, a fuse box with 12 fuses in it on the...

what are the differences in the windshield hinges between the 28-29-30-31? also I have a frame that is a later frame but missing the wind deflector at the bottom, could this be a repro. or were there frames made this way.

need a radiator for a 28 or 29 in Oregon