Search results

Are the full floating bearings for the rods the same from 39 trough 48?

I’m posting just for an informative note. These replace needle seat valves for many carburetor applications. They are made for ethanol fuel. I’m using them in three applications and feel like they are working great.

I’ve been rebuilding carburetors most of my adult life. I’m not going to claim that I’m an expert. However my carb’s work well and run very good. Over the past few years I rebuilt several Holly 94s and had nothing but problems, running rich , flooding over. I purchased kits from my regular old...

FOR SALE 1923 MOTEL T FORD DEPOT HACK. this was an older restoration that came out of long storage and was gone through, with many refreshed components. Super nice powder coated wire wheels, new wooden steering wheel, rebuilt coils, carburetor, tires, tire cover, milled head, valves ground and...

I'm building a 59-engine bored .100 with a 4" stroke Scat crank. I noticed the block is factory relieved. I think it was a truck block. I also found this number cast into the block. I have never seen one with this type of marking? look at the photo does the prefix C indicate a Canadian built engine?

I have a 39 coupe with a 59ab engine that's shot. I also have a Merc 8ba style engine that's rebuilt and ready to go . I would like to put it into the 39. what issues will I have regarding this swap? As I know the 8ba is somewhat longer due to the distributer placement.

need a set of metal rear fenders for a standard coupe in very good condition. casdiesel@aol.com

Are resister type fuel gauges polarity sensitive? Can I use a newer style gauge on an 8 volt positive ground system? They are designed for 12volt negative ground.

On my 31 A I Have an aftermarket switch IE on or off position. I wonder how this is working? When the switch is off (OPEN) I still get voltage to both sides of the coil. When the switch is on I also am getting voltage. I purchased the car already with this replacement switch in place. When I...

I'm putting a 36LB V'8 engine in a 32 with it's what appears to be a 32 stock V-8 transmission. The 32 clutch appears much different and the flywheel is indented . Will the 36 engine fit without any problems. This is the first 32 I ever worked on and am concerned the bell housing may not work...

Iso for a 32 v8 radiator in good udeable condition . Frank 914 474-1017 or email casdiesel@aol.com

I'm working on a 1936 lb engine that was rebuilt and sold to my customer. I think the cam gear is out of time, after installing the engine in a test stand while cranking over I'm getting compressed air out of the intake manifold and vacuum in the cylinders. Is it possible to change the cam...

I have a 3 bolt ignition that he converted about 15 years ago 6v positive ground my customer hooked it to 12v negative and fried the module . i can't find a replacement Pertronix module because the part number was on a plate that he removed to convert it . Does any body know the part number...

I need a hand Klaxon horn plunger the one with the finer gear spacing about 11 to the inch.

Has anyone come out with brake equalizers for the 1941 style brakes with the fixed bottom pin? I used them on my 1935 and they work great. Flathead Teds if I remember correctly.

I know this is not the hot rod section. However I'm trying to find the back story on this 1951 extreme custom I just acquired. A guy in Kentucky named Bobby Simpson built it in the 1970's , a shop named Thompson's also in Kentucky worked on it. Any input on it's history would be welcomed. Frank

Has anyone replaced one of the brass screws that hold the magnet spacers on the flywheel while the engine is still in the car? When i changed the oil this past weekend I found the head of one of the brass machine screws in the drained oil. . Just wondering if with the hogs head off is it...

I ran across this at Hershey, I couldn't resist buying it. I NEVER SAW A MANIFOLD LIKE IT! The carburetor is of course a Tilson, after market Model A carburetor, known to run better, with more power than a Zenith, also getting better gas mileage. I'm thinking of trying it on my 21 T model Ford...

Looking for a pair of Spartan horns. 1933 Ford I think the 34 are the same.

While California has some of the worst loses of life and property . I can't help but think how it would feel to loose everything you own and love.