Search results

I'm replacing the fan belt on my '29 A. The old one had lots of cracks. I loosened the generator, Its pushed up against the engine block. I have the new belt over the fan pulley and crank pulley. Its inches away from going over the generator pulley. Any tips? Do I need to get some kind of tool...

Thermostats on As are installed in the upper radiator hose? Thanks.

I'm going to be putting a new radiator, water pump, fan, etc on my A this weekend. Due to some family obligations I may not finish this weekend. Is it ok if I have my engine without coolant for possibly a week or two? Concerned about rust.

I have a '29 A. The radiator is shot. Its been repaired at least once before. I need to remove it and replace it with a new one. Problem is the Swan cap won't budge. I removed the tiny hex screw in the back that "locks" the cap on. There are three tabs on the top of the open radiator cap base...

Hey everyone. I have a '29 roadster with a 7 tooth steering box. It has a lot of slop and play. I had wanted to replace it with a rebuilt 7 tooth box from a Model A vendor. None are available. Only for the 2 tooth. I cant switch to a 2 tooth because I would need to send in the core of a 2 tooth...

I want to set the point gap and set the timing on my A that i bought a month ago. [COLOR="Black"]Cannot get the Distributor cam screw loose. Probably hasn't been adjusted in years. I sprayed it with WD40. Put the cam wrench on it and tried to loosen the screw. Nothing. I'll try it again...

I need a new radiator for my '29 Roadster. I want to be able to drive the car at least 50 miles to car shows. Do i need to get a pressurized radiator? If i do I assume I would also have to get a leakless water pump? Any recommendations?

I'm the proud owner of a '29 roadster for all of 2 weeks! Much to learn! Under the hood looks very stock. A week ago I opened the Flying Quail radiator cap to check the coolant level. I could see a metal plate a few inches down. No coolant covering it. So I added some Prestone. Went for a drive...