Search results

  1. C

    Speedster Buggy Springs

    I have a speedster that is fairly light. The ride is rather stiff. What sort of spring modifications have you made to improve ride on speedsters? Removed leafs? Anyone tried Posies Rod and Custom springs?
  2. C

    Adjusting Valve-Advice

    I have adjustable lifters on my "B" engine. When it was first assembled, there was a light clicking that grew louder over time. I decided to adjust the valves. One of the lifters was very loose. The clearance was over .040. The nut on the lifter is much easier to turn than the others. I...
  3. C

    Stock A Won Rookie at Coker

    A beautiful stock Model A won the rookie division at the Coker rally using a stock A speedometer. Impressive!
  4. C

    Water Pump Bearings

    Can the bearings on the standard water pump be replaced with sealed ball bearings?
  5. C

    Alternator Recommendation

    I have a 12V system. I want to put a "one wire" alternator on the car. Sixty five amps will more than cover the electrical needs. Can anyone recommend an alternator model that requires only one wire? Also, when I go to buy something at the auto parts store, the first thing they ask is what...
  6. C

    16" Coker Classic Blackwalls

    I have 4 16" Coker Classic blackwalls for $50 each. They were installed in 2009 and have about 600 miles. Local pickup in the Dallas area. 972-867-3371
  7. C

    Terry Burtz Engine-Vancouver

    Did Terry Burtz have his new Model A engine at Vancouver? I have not seen any comments.
  8. C

    Model B Crankshafts

    I broke a crankshaft between the number 1 cylinder and the front of the engine. I need to balance cost and being bullet proof. The engine has full circulation (40 psi) and 7-1 compression. I limit RPM's to 3500. What do you recommend on crankshaft for a Model B engine with full circulation...
  9. C

    Dan 4 Banger

    Does anyone know if Dan Price of Dan 4 Banger is still in business? Contact number? The number on his web site does not work. Thanks
  10. C

    Wanted Model B counter weighted "C" crankshaft

    I need a Model B crankshaft with cast counter weights (not welded on or press on type". Please contact me via private message or respond to this thread.
  11. C

    Pitman Arm

    Does anyone manufacturer a Pitman arm that has the square Model A connection on top and a hole on the bottom to fit a modern tie rod end? I saw an A with modern tie rod ends and want to do that for safety reasons. That person had cut his Pitman arm and welded it to a later Ford arm. I would...
  12. C

    Modern Starter Bendix

    A friend is having failures on the modern starter bendix's. He is running 12 volt on a 6 volt starter. Are there different quality levels of these after market bendixs? Where is the best place to buy one? Best brand?
Back
Top