Search results

Going to look at one next weekend and if its worth saving it will be coming home with me,it has a six and I have a 55 car 272 that needs a home so if I get it the 272 will be going in. The local junkyard has everything to put the car engine in it but since it could be my daily driver it will...

I picked up a 61 292 for my 55 and want to use the original temp gauge but I think the 57 and up heads are made for a smaller temp sending unit,is there a sending unit made that will work with my gauge that will fit the later heads or will I have to drill out the head.

My 65 Montclair has the o/d and it will need to come out to be repaired so I would like to stick a regular 3 speed in so I can still drive it so are the two trans the same length,the trans will most likely be coming out of a 68 Country Sedan.

My 65 Montclair has the warning light and the switch is broke,anyone know how long that parking brake assembly was used. I am going to hit the local old junkyard and see what I can find.

I have a 65 Mercury Montclair with a 3 speed o/d that does not work,it had burnt wires so they been repaired but still no o/d. Been running tests and relay is good but even with both wires to the solenoid disconnected and the relay grounded when the blue wire is hooked up to the solenoid it...

I need one for a 292,the one I have is for the 2 speed with three holes for the converter and I need the 4 hole COM flywheel

Looking for a 62 green dot COM trans that came behind a 292.

Working on a friends 58 Edsel convertible with power windows and the right rear dropped down,after some investigation the stud on the regulator where the roller attaches broke. New rollers are available but I was hoping to find a repair kit for that stud but I have not found any and since it has...

My 55 sunliner came with a electrically wound clock but since I converted to 12 volts it was disconnected,I found a wind up clock and had it gone through and installed until I can get the original converted to 12 volts. I have only seen three of those wind up clocks and wondering if they could...

I grabbed some parts off a 63 galaxie with a 260 that had the PCV on the intake,yesterday I was in a local old junkyard gathering the rest of the parts to make the 302 look older and found that most 64 and up had the PCV in the pass side valve cover and then I found a 65 Fairlane that had a road...

I picked up the timing chain cover and all the parts from the front of the motor off a 63 galaxie that I think has a 260,I got them since the timing chain cover has a oil fill tube and will work great if I decide to put Y block valve covers on it. I was told they can bring some good money so I...

My 66 originally came with a 352 and truck 4 speed and I had put a new clutch in it a couple thousand miles at the most before it got a 460/C-6,now its going to get a 351-W and 3 speed and would like to reuse the clutch parts since they have no miles on them. Its a diaphram PP and it looks like...

I thought I read that there were 4s in 34 and thinking about building a model of one,would they look similar to a A motor with the exception of a fuel pump. I can get plenty of A motors in 1/25 scale.

I have only seen two and its been many years ago and would like to see pictures of the motor since I am thinking about building a model of one,since they were in pickups was it also available in a panel truck and how about a sedan delivery.

All I have seen them as were deluxes but since they were officially trucks I would have thought they would have came as standards,I am going to build a model of one as a standard and was curious if they were ever made.

Looking for a non electric wind up 55 clock,would like one that is ready to go in since I lost one that I sent to a clock shop to be repaired that closed up shortly after.

Got rid of the aluminum wheels and put steel rims and the original small hub caps back on,now I am thinking about building the drivetrain like I would have ordered it in 55 with a 3 speed o/d instead of the FOM.

Looking for a set of 55 or 56 small hub caps that are in decent shape.

About ready to start putting the 49 convertible model togather and wondering if a 50 has the same steering wheel as a 49,if its different it will put the brakes on this project since all I have is one from a 50. I am using the body from the AMT 50 with some 49 parts to get it to a 49 and will...

Finally making progress on the model of a 49 convertible my dad had back in the early 50s and I need to know what color the motor is supposed to be.