Search results

New in the box Ecklers Passenger side Flathead V8 water pump. Gasket in box, but is ripped. Macs Part # 64-17777 OPR 95 hp Water pump $55.00 plus shipping

I am working on a 1933 closed car windshield, and was wondering if anyone makes replacement L blocks that hold the lower joints together that the screw's thread into ? I know that Dave ( 34Coupe ) was making some years ago, but he has not made a post on the forum since 2020. I was wondering...

1932 Ford Model B 4 cylinder Flathead Motor Mount Bracket $65.00 plus shipping Located in N. Hollywood CA.

I have a 1933 Model B 4 cylinder I am working on and had a sloppy pedal on the cross linkage mounted on the firewall and was not getting full throttle ( more like half ). So I got a replacement linkage off a low mileage car to install it and realize that I might have the wrong length linkage...

How can I identify which steering box is in a 1933 without taking it apart ? I was wondering if it is a 13:1 or a 15:1 ratio ? Any help would be great, Thanks.

1934 Ford Hood side. Very usable, but is a little bent up, pitting and some pin holes. It was striped to bar metal, front has a light coat of primer. $175.00 plus shipping From CA.

I had a problem with a intermittent running condition on my new to me stock 1933 Ford Model B. I traced it to the coil wire and ordered a correct replacement from a reputable vender waited the week to get it for it not to fit. It was short by 3 inches ( insert joke here ), So I was going to just...

I have recently come in the the possession of a 1933 Model B, the rotor in the distributor is making shavings in the cap. It looks like it will need a set of bushings at a minimum. I naturally think of Bubba and the great workmanship and service he provided. But unfortunately that ship has...

This is a driver side '34 ford hood side, it is in very usable shape . It was on a shelf in bare metal since the 80's, it now has a light coat of red oxide primer to see it's condition better. On that subject it has some bends, dents, surface pitting and pin holes around the handle holes...

This is a driver side '34 ford hood side, it is in very usable shape . It was on a shelf in bare metal since the 80's, it now has a light coat of red oxide primer to see it's condition better. On that subject it has some bends, dents, surface pitting and pin holes around the handle holes...

I have a pair of 1946 to 1948 Lincoln door button's that came off the same car one is use able condition, but does have a small ding in the outer trim ring. The second one is maybe good for parts but does have the surface ground down. Please look at the photos and PM me with any...

This is a horn button off a 1956 Ford, I am told it is for a Mainline or Sedan delivery without power steering. It is in good shape for a driver but does have some pitting in the chrome. Might also work on a 1957 thru 1959. $30.00 plus shipping

I have a 1933-1934 2 door sedan standard passenger rear window garnish . It is in use able shape but does have some pitting. there is some rot on the back side edge of the frame, please look at the photo's. Not trying to scare anyone off, just trying to give an honest description...

I have a 1933 / 1934 standard 2 door sedan pass. rear window garnish. It is in useable shape, but does have some pitting. there is some rot on the back side of the frame, please look at the photo's. Not trying to scare anyone off, just trying to give an honest description...

I have a 1934 2 door sedan pass. rear window garnish, it might also be correct for a '33. It is in useable shape, but does have some pitting. there is some rot on the back side of the frame, please look at the photo's. Not trying to scare anyone off, just trying to give an honest...

This is a NON world class T5 transmission, or what is left. It was rebuilt, to the tune of a grand. You can see by the pictures how clean it is inside, but I put a little to much horsepower to it and chewed the teeth off a couple of gears. So it is now up for parts, what see in the photo's...

This is a truck four speed off a Flathead engine I bought, it is off a orchard wind machine. So it was put in gear and the shifter cut off, I have not opened it up but I am told that these are always pretty clean inside do to lack of gear change's. I believe it is a 1946 model. NEW reduced...

Here is a new reproduction 1932 door handle, i think made by Vintique. I bought it for my '34 but it turned out to be for a '32. SOLD, SOLD, SOLD !!

This is a single Ford steel wheel, 15 x 5 1/2 it is in good shape with 5 on 5 1/2 bolt pattern . There are some slight bends on the rear lip ( see photo ) SOLD, SOLD, SOLD !!!

This is a single stock Ford wheel that is 15 x 5 1/2, it is in good shape with a 5 on 5 1/2 bolt pattern. Couple light bend's in the rear lip. Take a look at the photo's. $50.00 plus shipping PM with any questions,