Search results

Looking for a 34 clutch pedal, 40-7520-B or 40-7520-B2 One is the I beam style the other oval like the brake pedal. Not interested in ones that are egg shaped in the bushing area. Thanks

Model A engine that does turn over. No markings on pistons other than a ***** punch to show what bore they go in. Valve chamber has little sludge. There is a spot between 3 and 4 cylinders that had what looked like JB weld but after removing that I didn't see any crack. Just want that known...

Model B engine with the CB crank that has the weights sweated on. Does turn over. I can not see any cracks in the deck but it does have minor pitting near the valves. Exhaust valves have hardened seats. Comes with nice straight and dent free oil pan, flywheel, flywheel housing, head and valve...

Can someone tell me the thickness of the metal used to make the U shaped spacers that are used when putting a later model flathead in an earlier frame.

The trico wiper for my pickup is a KSB 383-1G. The wiper arm I got is a 78-17529 listed for a 37-39 closed car and pickup. The problem is the arm is splined while the wiper shaft has six sides like a Allen wrench. Did they package the wrong arm or what arm should I be looking for? Like the title...

I purchased a 39 1/2ton pickup last year. I just got it where I can start doing test drives and I noticed the speedometer was off and the odometer did not work. The speedometer is now reading half of whatever speed I am doing. The rear is a 4.11 with the correct drive in the turtle. Speedometer...

Trying to understand how the harness is layed out. Does the junction after the headlight bail go between the front crossmember rails with the main part of the harness then going towards the firewall? Does the main harness then attach to the dash harness or does it go through the crossmember...

I have a 39 pickup and the column lock works. Issue is the leaver that turn the ign on or off is broken and removed. It is damaged where it attaches. Does anyone sell new levers and how is it held in place. Can it be repaired without removing the entire column from the truck.

The rear main bearing in my 59 block is marked A2. I see standard would be 81A - 6331A. I see different codes in the green book but nothing for A2. Anyone know what this means. The crank measures standard.

Looking for a model b or lightened flywheel. If you have one and are close to Middletown or coming to Spring Carlise PM me with price. Ken

Berg's water pump that came off a Model B motor I bought. Shaft turns but is missing pulley. Asking $30 plus shipping. Can't seem to load photos here but here is a link to the Hamb listing. www.jalopyjournal.com/forum/threads/model-a-b-or-t-water-pump.1136563/

I found one. I need a good 32 Model B water pump housing. No rusted up necks or cracks. Email me at marshmetz@aol.com

I found one. I need a good 32 Model B water pump housing. No rusted up necks or cracks. Email me at marshmetz@aol.com

Rebuilding a Riley 4 port head and the valves are Jadson F1058. Riley literature says the valves are 1/8 inch oversize Model A with the mushroom style stem. I can not find any or even any cross reference listing for these. Not interested in a modern type valve at this time so can any one help...

Looking for some NOS Mallory points. Number is 24205 used in YA 11A dist. Email me at marshmetz@aol.com

Looking for a nice pair of orginial Deluxe windshield stanchions for 30/31 roadster. You can email photos and price to marshmetz@aol.com Thanks Ken

Looking for a Stewart Warner tach drive like in the photo. These were usually found on industrial or stationary motors.

Looking for a Stewart Warner tach drive like in the photo. These were usually found on industrial or stationary motors.

Will be taking a 37 Ford V8 60 motor. Not running and will need rebuilt. Space is C4R 46 Price is $350

Where can I find a rebuild kit for a V8 60 fuel pump? I looked in Mac's catalog but they don't list any. Is it the same as other flathead pumps?