Search results

Have 2 complete 9 inch rears out of ‘57 Fords for sale . One from retractable, one from convertible. $300 obo each

For sale one C1TE forged steel crankshaft for 292 Ford Y Block. Measures up standard on rods and mains. Journals are very good with no scratching, etc. Polishing may clean it right up, at worst 10/10. Asking $475 plus the ride. PM with any questions or if pictures wanted.

Ford Y-Block tri power set up. Edelbrock 573 intake and 3 Ford 94 carbs. The 573 intake is the large port intake, best used with ECZ-C and ECZ-G heads. The carbs are ECG center carb and EBU end carbs. The carbs have all been recently kitted. The intake is clean and crack free, with all...

One set of factory exhaust manifolds for 289 HiPo Fairlane application. These are very early take-offs for header installation, have been on the shelf for over 50 years and the condition of them is excellent. No pitting from salt, sealing surfaces like new. P/N's are C3OE-9430-C and C3OE-9431-B...

Have a couple full boxes of Cougar parts pulled from cars years ago. All are good used. Some of what I have is: std steering wheel XR7 inst panel and gauges with 6K tach std inst panel assembly woodgrain insert with clock outside door handles(3) arm rests (3) front fog lamp assemblies...

For sale one D0ZF-AB 428 CJ NOS Holley 735 carburetor. Application from research is automatic trans with manual choke. $750 best. Be happy to send pictures or answer any questions.

For sale one D0ZF-AD 428 CJ NOS Holley 735 carburetor. Application from research is automatic trans, AC, manual choke. $750 best. Be happy to send pictures or answer any questions.

C6 round bell auto for FE Ford. Raybestos clutches, HD band, shift kit, new gaskets, seals, screw in modulator can. 6 mth warranty. $850 plus core. Streetdreams for : Sledgehammer Transmissions. 734-516-8903 These are well built transmissions. Have used on past builds with no issues.

Have a rebuilt C6 for small block Ford for sale. Completely gone through properly. D1AP case, D0ZP Mustang shift lever. Done bySledgehammer Transmissions, 734-516-8903. I have used their transmissions in past projects with no issues, they build a great box. $850 with core, $1000 without core...

Rebuilt 4100 4 bbl with 1.08 venturis as used on early 289 Mustang, Falcon, Comet. Jetted to 48 Primary, 55 secondary jets. Carb part number is C6AF-F. Comes with base gasket. 480 cfm.

I'm describing this as a "used" NOS service quarter for a '69/'70 Lincoln Mark 3. It was installed on the car with screws, painted and that's how the car showed up. In great shape, a few small dents from bouncing around for 20 years, and some surface rust, but no rust out. Has the gas door and...

Recently kitted for a project that changed direction. C6OF-9510-N Holley 600 for 1966 390 GT Fairlane/Comet. Build date 651. First week May, 1966

1920's to 1930's rear external trunk. Made by the Potter Mfg. Co. in Jackson, Michigan. They made these for inexpensive new cars like Model A Fords that didn't have factory trunks. Ford dealers sold them as accessories. This one is in good straight unrusted condition, missing a latch on the left...

Factory hood scoop for 1971 / 1972 Cougar. P/N D1WB-AA. Has some chipped corners, needs restoration but is more than restorable. System issues, will get pictures up when I can. $250 obo.

C6 round bell auto for FE Ford. Raybestos clutches, HD band, shift kit, new gaskets, seals, screw in modulator can. 6 mth warranty. $850 plus core. Streetdreams for : Sledgehammer Transmissions. 734-516-8903 These are well built transmissions. Have used on past builds with no issues.

Rebuilt 4100 4 bbl with 1.08 venturis as used on early 289 Mustang, Falcon, Comet and jetted down to 48 Primary, 55 secondary jets. Carb part number is C6AF-F. Less expensive way to put a proper size, original type carb on your early 289 instead of the C5ZF Mustang carb restorers want. Comes...

For Sale. Ford Y-Block 4 bbl intake, ECZ-B. Reconditioned. Sandblasted, all threaded holes chased and good, mounting surfaces cleaned and stoned for flatness. Comes with t'stat housing prepped the same, front heater hose fitting and carb studs. This manifold works best on ECZ-C and ECZ-G...

Barn find and excellent restoration project. This car is all original down to the hubcaps and has not been restored or modified. Car has remained relatively intact since its' build date of Nov 15, 1965, with no major panels or mechanical parts changed out or replaced. Great starting point for...

Have a VR supercharger that has a fine oil spray out the discharge( engine ) side. Understand these blowers are more rare than the VS blowers. Looking to discuss some kind of deal trading/$ the VR for a decent functioning VS unit. Also any insights or info from the Barn appreciated.

Have a VR supercharger that has a fine oil spray out the discharge( engine ) side. Understand these blowers are more rare than the VS blowers. Looking to discuss some kind of deal trading/$ the VR for a decent functioning VS unit. Any insights or info from the Barn appreciated.