Search results

I seek an original pair of VE28 lenses in excellent condition. They have the Ford logo at the top, like this picture. The edges must be completely intact and show "McK" or "L.E.S." The reproductions do not have the correct I.D. info on the edges. I will pay $1,000 for an excellent...

I always wondered what "Gum Dipped" referred to on old Firestone tires. This was today's antique-market find. I paid $1 for the card.

Will Pay $1000 for early headlamp lenses I seek an original pair of VE28 lenses in excellent condition. They have the Ford logo at the top, like this picture. The edges must be completely intact and show "McK" or "L.E.S." The reproductions do not have the correct I.D. info on the edges. I...

LINK

This cowl lens has a vertical flute pattern like the 28 headlight lenses. Contact me with particulars either by PM or by email. Thanks, MikeK

"A" block, definitely not a restamp! I know small bore engines were prefixed AF or AAF, but I've never seen one start with an R. The small bores were used on both left and right drive vehicles, but to my limited knowledge the engine numbers themselves never reflected this. A and AA...

Q1.0

Fluted with Ford oval and "H" AT THE TOP, not the bottom. Please send PM or email buyusaproducts@yahoo.com Thanks, MikeK

Looking for 24/25 Owners manual. Not one of the "fits all" 1920 to 1926 booklets sold by some of the parts vendors. FOUND ONE Thanks.

Help! Help! I'm a Model A guy (40B & 160B) so I'm way lost over here. I'm looking for an Owner's Manual for a 1925 T. All I see in the reprints from the parts vendors is a 1915-1925 booklet. Did Ford use the same one with no revisions for ten years? Hardly seems possible. I'd like to...

Anyone with judging experience in Area 17: Tools? I have acquired a complete original late '31 manual for my 40B. The best one I have come across in several years. The last sentence, italicized, on p.17-4 states: "If the manual is complete, including the cover, and the pages can be opened...

Does anyone have a good photo of a Gemmer shaft that has been damaged by running in a a non-stock needle bearing housing? I'm looking for picture(s) that show either ripple indentations from the rollers, a ridge buildup at the edge of the wear print, galling, or ??

In a recent thread LINK Mark Maron posted a picture of his new uber-spendy 6V halogen lamps from Classic Vintage Bulb. SteveB31 from Berts also posted a link to their 6V halogen. I put together three pictures: Here's what I see- 1) Neither halogen has the same filament shape or orientation...

[/IMG]Who says you can't take it all with ya? Forget the casket. Man buried in his car. Guns, too. :cool: Mechanical engineering 101: If you put an adjustment knob, screw, bolt, or tolerance specs on something, some people will immediately fiddle with it. If you mark it DO NOT TOUCH everyone...

Does anyone know of any non MARC/MAFCA affiliated clubs that are specifically Model A? Some or at least one must exist somewhere. I'm curious after reading THIS PAGE, paragraph #2 It does not state the independents are strictly "A", but I'm just curious.

LINK

Is there any original spec for track width, the distance between the center of the left and right tire print? Is it identical front/rear or is there a slight difference? I could measure one of my A's, but I'm looking for an exact Ford spec. Anybody???

Is there any original spec for track width, the distance between the center of the left and right tire print? Is it identical front/rear or is there a slight difference? I could measure one of my A's, but I'm looking for an exact Ford spec.

Hmmm... LINK

Hey guys, I'm a Model A guy, and have a T question. New model A engines had an odd compression height on the pistons. When combined with the stock rod length, the pistons protruded 1/32" (0.0315") above the deck of a "perfect" engine. Did T's have the top edge of the pistons even with or...