Search results

I have a '39 Zephyr Coupe which now has around 100 mi on it after about a 13 yr build. I've noticed with dropped axel the steering rod slightly rubs the v12 pan. I don't want to lower steering arms and I've wanted to try some tie rod ends that have a lower by 1/2 inch or so 11/16x18 thread and...

In trying to take the slack out in my steering. I've run into a problem, the steering box adjustment screw is not going down to the position it was when I took it off to clean threads on screw and lock nut. The sector shaft seems to be in a higher position, although the steering seems to work...

I need good used 34 Ford 5w scuff plates, or repairable. Thank you cdan34@att.net Chuck

Wanted some good used '34 Ford 5w scuff plates. If they are repairable that's ok too. Chuck 415 388 2882 cdan34@att.net

Best offer for four early Ford General Jumbo rims with 5 x 5 1/2 bc. Chrome is street quality on 3. One has area on one spoke should be re chromed. The rims are attached to centers with 3/8 x 24 machine screws. The spokes have threaded tapped plugs welded in. All work was machined and done on...

I'm in need of some original '34 5w scuff plates. In ok condition don't have to be perfect. Chuck 415 388 2882 cdan34@att.net

For sale 4 General Jumbo Wheels and 4 Caps. The chrome on the wheel spokes is quite presentable and the hub caps are perfect stainless reproductions. The bolt circle is 5 on 5 on 5 1/2. The wheels have been run many thousands of miles. They are rebuilt and run true. Pick up or buyer pays...

Ford, Unused 28 tooth cluster gear,includes shipping. Chuck 415 388 2882

'46, '48 Lincoln rims 15x5, 5x5.5 bc, good tires, some blemishes on white wall, beauty rings, hub caps look good. $425. Chuck 415 388 2882 cdan34@att.net

I need '39 or later 16x4.5 Lincoln rims, it would be nice if they had hub cap clips. Thanks Chuck 415 388 2882 cdan34@att.net

I need 16x4.5 or 5 inch wheels. These could have been on Ford, Lincoln, Merc or Ford truck with 5 on 5.5 bc lugs. I think the years starting in '39 and showed up in different years. With hub cap clips would be good. Chuck 415 three 88 two88two cdan34@att.net

I'm looking for 16 inch rims '39 Lincoln Zephyr or Ford style, with ford bolt pattern 5x5 1/2. I could use 4.5 or 5 wide rim. If they have the hub cap clips that would be nice. Chuck 415 three 88 two 88 two cdan34@att.net

Do any of you guys know if the center dimension between crankshaft and camshaft are the same with the Ford v8 and the Lincoln v12. I built a v8 years ago and used a v12 cam gear. It looked the same and fit fine and runs good. I'm now building a v12 and find the center distance is about +.025 on...

I have a fresh 276 ci French block with a Camden blower. I'm using '52 Merc heads and I've run the engine on and off for maybe 15 minutes. I think I've got most of the details carburator, timing, and fan dialed in. The engine gets up to 190 temp and I'm thinking that's a bit much for me. I took...

This question is about the start up of a rebuilt flathead with all the good hi performance stuff. Trying to help my freind with this project, we can't seem to get oil pressure. It has a Melling helical gear oil pump and Motor City Flathead out side oil filter. When the engine was turned over the...

I need holder, bracket for the '34 Ford gas pedal that attaches to the firewall. I have the spoon assembly. Thanks Chuck 415 388 2882 cdan34@att.net

I need an original 6 spline early ford 3.78 ring & pinion. n.o.s or good condition. Thanks Chuck

Columbia freeze I was on my way to the L.A Roadster show with my '34 Cabriolet and 55 mi out, what I believe, was the rear end locked up, fortunately I got over to the side of the hwy and was trailered home ok. Before leaving the oil level was checked. It was bulletproofed and had pull out...

I was on my way to the L.A Roadster show with my '34 Cabriolet and 55 mi out, what I believe, was the rear end locked up, fortunately I got over to the side of the hwy and was trailered home ok. Before leaving the oil level was checked. It was bulletproofed and had pull out axels with bearing...