Search results

looking for the center x member rails i have the center part macjunkers@aol.com found a set thanks tom

I have a 9 inch ford housing with axles the 4 bar brkts and coil over brkts ,it is 57 inches with the axles in it small bearing with 28 sp,center pinion 32 inch center to center between the coil overs 400 plus the ride I also have a 3:50 gear set new a new t lock posi macjunkers@aol.com

i have an old offy 3 carb in take with 3 94's on it 2 of the 94's are model 59 the other is a 21-29 $350 plus the ride macjunkers@aol.com

i have the driver side only spindle off a 1933/34 very nice shape $45 buick 90 fin drums will clean up at .020 $80 pr offy 3 carb 39 to 48 no carbs $200 all parts are plus the shipping

i have a N.O.S rear cross member for a 1932, 33 or 34 i am not sure of the year. $300 obo

looking for N.O.S front 33/34 shackle kits or parts 40-5463 A shackle pin spring 40 -5464 B shackle pin prech thanks

looking for one or both sides of a spilt 33/34 wishbone. i have a mint wishbone i do not want to cut for this project. i need at least 20 inches back from the weld of the clamp but interested what you might have. thanks

flathead truck pan with clean out hole $75 ford truck bell housings $60 ea 1 cast 2 steel 49 to 53 ford stamped steel 4sp flathead car bell housing $70 49 to 53 ford 360 regrind 39 to 48 cam, never ran $100 offy 3 carb intake $250 32, 33 , 34 ford N.O.S rear cross member $225. new offy chevy to...

i have a curved 32, 33 34 rear crossmember it is N.O.S $225. and the ship

i have a 1928 to 1934 ford super bell axle complete , spindles, arms, tie rods, vega box with weld in brkt, pitman arm, disc brkt & rotors, 4 bar, weld in brake master cylinder this set up was never run on the road, was used for mock up, then sat 25 years in the corner $ 1200 obo. will ship...

i Have a N.O.S rear crossmember some say its a 32 , it is taged 33/34 $250 & shipping

Edelbrock 2 carb w/ 94's carb's will need a cleaning $225 complete bell axle set up $ 1000 axle, sping, vega box, tie rods, arms this was only used to roll the car in & out to work on. N.O.S 1932 rear crossmember $ 250 cast ford bell housings $50 stamped steel round bell housing $50 flathead...

looking for a model A or 33/34 wihbone ball end using to extend a 35/36 wishbone on my 33 thanks

Looking for 33/34 ford car wishbone parts. the end that bolts the wishbone to the axle, does not need to be long. Using to extend a 33/34 big truck wishbone. but need 33/34 car wishbone ends thanks

39-48 offy 3 carb intake not a repo $250 plus 15 to ship

Looking for 33/34 ford wishbone parts the end that bolts to the wishbone, does not need to be long. Using to extend a 33/33 big truck wishbone thanks

1932 N.O.S rear crossmember $250 nice set of 33/34 spindles $150 plus shipping have a complete 4 1/2 super bell drop axle set up with 4 bar links, spindles, arm, vega box, and cross steering links disc brake brkts. spring. this has never been used, just been sitting in the shop a while...

y block ford to flathead adpt $80 stamp steel bellhousing $65 have cast bellhousing $50 ea Edelbrock super 2 carb $175 have to matched 94's will sell with inake only $75 pr 1933/34 big truck axle & wishbone $175 48 axles with spiders $100 have old honda & suz scooters looking to off buyer...

looking for 33/34 raditor v8 33/34 gas tank for mock up 33/34 spindles have 2 super 2 carbs intakes, offy 4 & 5 speed trans adpt. have flathead cast & steel bellhousings 33/34 good 4:11 gear set center dump headers will trade.

looking for the following 33/34 ford looking for one nice 33/34 front spring preach 33/34 rear shackle parts or kit 81T dual truck pulley 33/34 rear axle bearings and race 33/34 rear pinion bearings only have N.O.S race. 29A rod bushing junk 6 spline pinion for making a tool 33/34 wishbone...