Search results

Eight A's from the Worcester County Model A Club are heading North today to NH for the Annual Dust Off at the Bean Farm tomorrow April 25th. Hosted by Carl Snierson and the Pine Tree A's. They shooting for over 100 Model A's tomorrow. DON’T FORGET THE ANNUAL DUST OFF SATURDAY APRIL 25, 2025...

On an original 1930 Radiator from the factory how many cores rows were there? Two rows or three?

Over steer does alignment influence oversteer? My A is quick to oversteer. The toe in is about 1/16”

Head Lamp bulbs, 32/50 candle power Question on installing the 32/50 candle power head light bulbs. 1. Is the low beam filament on top with the high beam on the bottom 2. How does one know which is the high beam filament vs the low beam, both by appearance and size look the same. The bulbs go...

When Ford listed the different weights for each Model A body style "gross vehicle weight, was this a dry weight less fluids i.e. oils, coolant and gas?

Who is carrying (vendor) the best distributor cam which the points ride on.

On the Tillotson Model X Carb what is the thread for the jet in the bowl of the carb the one in the in the base of the bowl. I need to chase the tread.

After disassembling what is the best solution to soak Zenith Carbs in to clean out the passages? Also, what works in Tilston’s?

Which direction do do you turn the tie rod to adjust toe-in Clockwise or Counter Clockwise.

I recently acquired a side bowl carburetor. The top of the carburetor with the side bowl filter is on a Zenith-2 base. Were these side bowls carburetor produced as a Zenith-2 or Zenith-3.

Hats off to CMARC for putting on and hosting a great New England Model A Meet. We had a great time in Rocky Hill, CT

Thank you for all the tips, on Logo Lites focused LED Headlight blubs that were flickering. I went back to checking all the connections and found that the blubs were fitting very loose in the sockets. I squeezed the sockets closing them slightly for a good friction contact with the side of the...

I just installed Logo Lites focused LED Headlight blubs from Mikes A Fordable and am see a flicker in both lights. I am running an 6 volt alternator. I seem to recall reading about this and how to cure the flicker. Any suggestions?

I am going to help a club member (youth member 17 yrs old) mount his 1930 pickup cab to the frame. Is there a diagram on where the mounting blocks go/orientation? Thanks Keith

Just mounted a set of new tires 19" on my sedan and for the first time over many tire changes that I have done over the years I am getting a bounce on one of the front tires. Do the glass tire balancing beads work?

Question: Does a 1930 Tudor sedan rear fender fit a 1930 Briggs Fordor Sedan Keith

On 6-8-2024 I posted a problem I was having titled Front Brake Shoe Grabs. Thank you for all of the suggestions. To fix the problem after going through all of the suggestions I ended up installing P/N A-2051-F Brake Floater Kit from Snyder, it replaces P/N A-2051 Wedge Stud. I found the shoes...

Front Brake grabs violently when applying light to medium pressure when coming to a stop. This occurs when first starting out in the day and with a few hard quick stops it sometimes will go away for most of the ride occasionally coming back. The front brakes when applying also sound like a Mack...

Fitting Spindle Bolt - King pin in new bushings. Replaced the upper and lower bushings in the front wheel spindles and reamed using the kingpin bushing reamer (0.8125" dia.) but the new King pins or spindle bolts still will not go in. Question any tricks to open the bushing up. I thought about...

What time mfg. build date range did they use a 60" bumper bar length vs 63" length for the 30-31 style bumpers? Keith