Search results

Hello, my 37 Fordor has a bad ****** and needs to be replaced. I have never done this before. Question1: can I somehow replace the ****** without moving the rear end? I read somewhere that the rear end needs to be disconnected so that it can be lowered and pulled back enough to remove the...

hello, I know nothing about transmissions, but I am needing one for my 37. I recently bought a ****** from a guy who wasn't sure of the year. I cracked it open today and disassembled it. The cluster gear assembly has the gear teeth of: 28-24-18-15. From the green bible, it appears to be pn...

Am looking for a good, running, complete 37 21 stud flathead motor. Thanks, gregg

Hello, Am looking for a rear bumper that fits the following vehicles: 1937 Sedan Delivery 1938 Sedan Delivery 1939 Sedan Delivery 1937 Panel Delivery Just about any condition would be acceptable. Would need pics. Thanks, gregg

I am cleaning up. Please see attached pdf. I have no idea what these go to. What i do know is that they are going bye-bye in a week. If anybody wants them (free) let me know. First come, first served. gregg

The 37 has four running board braces. I need both (left and right) the forward located braces. Normally, these are riveted to the frame. Thanks, gregg

Hello, I am restoring my 37 SD and am missing most of the parts in the rear quarter area. Parts such as metal trim pieces, spare tire mount stuff, floor trim pieces. Any help would be really appreciated. Thanks, gregg

Hello, I am rebuilding an old rusty 37 column drop, including the ignition switch and internal locking assembly. I have it all apart and soon will be putting it back together. Questions: 1. what lubricant should I use (if any) for the rotating assembly. This includes the left/right sliding...

1939 Deluxe headlight doors (bezels) for sale. $15 each. I have 1/2 dozen of them. They are in good shape. Shipping will be whatever I get charged. I can ship Fedex, UPS or USPS. Thanks, gregg

Hello, Am in need of a couple of thumb screws for the spare tire hold down bracket for my 37 Sedan Delivery. Also need the spare tire cover and bracket. Thanks, gregg

I need the left and right side wiper motors. Trico KSB 366-G/367-G These PN's were suggested by "wiperman". I believe they are post war motors. They need to be in proven working condition, please. Thanks, Gregg btt

Hi guys, I have what appears to be a stock 37 wiper motor, driver's side. It needs to get installed ASAP. I will try testing it out with a vacuum source tomorrow. My question is, even if it works in some fashion, should I give it a refresh? For example, should I remove the top and...

Hello, Am purging my garage. Ran across this sun visor and have no clue what make, model, or year it is for. Can someone ID this for me? I don't need it and will give it away, but would like to learn about it along the way. Thanks, Gregg

Here is the start of a looooong resto project. My wife calls it the burden.

I have an instrument panel for a 37 car. A long time ago someone modified the two gauge holes and enlarged them to install a custom set of gauges. Additionally, the same idiot drilled two ~2" holes above the choke and throttle holes, also for custom gauges. That idiot was me as a wanna be hot...

I have a 37 header panel. It has the round speaker hole covered over with a welded plate. The end areas where the visors mount is a bit modified, not too bad. Over all, the panel is fairly straight, no rust. I have had it since late 60's. Time to let it go, and it is free, plus the cost of...

I have some miscellaneous parts that I don't know what they go to, neither year, make nor model. The attached pics show what I have. First come first serve. They are yours for the price of shipping. Please don't ask for the parts if you plan to just re-sell them. Send PM to my email if...

Hello, Mama won't drive in my original 37 Fordor until I get seat belts installed...thus this post. And, as most of you know, if Mama ain't happy, NOBODY is happy! Anyone know were I can get some decent belts (don't want shoulder harness type)? I assume they will tuck down through the seat...

Hello, Am looking for the chrome end pieces (and screws) that attach the robe rail to the rear side of the front seat on a 37 Fordor Deluxe. Thanks, gregg

Hello, Am re-installing the torque tube on my 37. I bought a gasket and cork seal ahead of time and now have some questions. The gasket has 6 holes to line up with the bolt pattern of the rear end assembly where the tube mounts. Should I use gasket sealer (e.g. permatex) or just use it dry...