Search results

Planning on building a decent touring motor for my 29 Special Coupe. Going to use Snyders pistons, ss valves, 1 piece guides, self locking adj lifters, B cam, counterweights, the only thing I can't decide on is what inserted rods to use. Snyders offers some rods that have the bearings wrap...

I'm putting an engine back together. I forgot what the main and rod cap clearances should be for the plasti-gage.

Does anybody have any plans/blueprints for a Huckster body with doors? And possibly dual rear doors?

Met a guy today who would like to get his car ready for touring season. Mainly he wanted it to be safe so he ordered a set of LED tailights but he has the drum style housing so they did not fit. Anybody know of a vendor who sells LED tailights for drum tailights or a way to modify them to work...

Backed out of the driveway this morning and noticed what felt like the right front brake dragging. I say right because when I was backing out the steering wheel turned to the left. (Counter clockwise) The sedan has hydraulic brakes on it. And we just redid the front wheel cylinders. So i'm sure...

I've heard of people adjusting their brakes according to how hot they get after a drive. How hot should a set of cast irons drums get after a good 5 mile drive?

I was digging through my grandpa's stuff the other day when I found a exhaust manifold that had raised lettering around the rear downward bend that says "Indonesia/Argentina". Do I have something here? I've personally never seen one before, but that's not saying a whole lot.

Got the sedan back together after doing a full mechanical resto, aside from a few other minor things, i've noticed I have little to no power. The timing is set at 0-28. The distributor is a Mallory built by Ron Kelley out of Texas. This distributor ran fine when we had it on our coupe. Checked...

Picked up a set of what the guy called "mountian brakes" at a swap meet today. The backing plates that came with it look identical to the stock model a backing plates. Are they? And do they use the same wheel bearings as the model a? I can also see why they're called mountain brakes from the...

Just throwing it out there because i've always thought it would be cool to own a RHD model a. I'd like to trade my LHD parts for RHD parts straight up. Any info please PM.

Got a speedster from an estate sale for $300. Complete chassis except for the brake rods and carb. Gas tank looks clean. Engine looks good inside the combustion chambers and the motors free. Gonna throw a carb and some plugs on it and what not and see if it'll run tomorrow. Plan to drive it as...

Does anyone have any information as to where I could get one of these? I heard of a company out of California sells then, but I haven't been able to find any info on them.

How much more value, if any, would it add to a model a if it was an original right hand drive car?

Last May ou club went on a tour and part of that tour involved driving down a dirt road. We were cruising along in second gear but just not fast enough to get into third. We put the transmission in March of 2010 and it had about 3500 miles on it when it broke. Before this it would only come out...

What would the towing capacity be for a Model A Ford with a stock drivetrain but with some engine upgades? High comp head, B cam, B crank, B rods with 283 pistons, etc. I've searched on this subject but could only find threads about "towing your Model A" not "towing WITH your Model A." I've been...

http://cgi.ebay.com/ebaymotors/1930-Ford-Model-AA-Quadcab-Dump-Truck-785-Miles-after-restoration-?cmd=ViewItem&item=130607796279

Is there a difference between a fordor sedan and a town sedan? If so what are they?

test

test

http://cgi.ebay.com/ebaymotors/Worlds-Finest-Restored-1929-Ford-Model-Sedan-Delivery-/280768230861?pt=US_Cars_Trucks&hash=item415f1735cd