Search results

There is a member on here Krylon32, who gives a 10% discount on the retail price of Boling Bros repo Lincoln Bendix brakes to fordbarn members. These are the finest bolt on brakes you can fit to an early Ford V8, they duplicate the Bendix brakes as fitted to Lincolns of that era. They are self...

delete, found some, thank you fordbarn

Did ford or any aftermarket manufacturer, ever make .030" -.004" 81A 6211 full floating rod bearings? I know Ford made .030"-.008", but I'm looking for something a bit smaller on the o/d. Long story; I'm building an engine and supplied everything to the engine balancing outfit to balance; all...

I'm seeking a crown wheel and pinion to suit 42-48 1/2 ton jailbar pickup. What's out there?

I post this as it may help someone in the future...I recently purchased a 35-36 temp gauge that had been in storage for who knows how long hanging upside down. This had caused the red liquid to entirely fill the glass tube. In attempting to move the air bubble back up the capilliary tube into...

Does this work?

For some time now, I've been searching for the three chromed bezels that surround the controls on a 39 radio...placed wanted ads on here to no avail.... Iron trap had such a radio listed on eBay for $75.00, BUT an additional $100.00 shipping to my New Zealand address, plus eBay collect an...

Is the front bumper and irons on a 40 pickup the same as on a 40 passenger car?

I'm looking for the chrome bezels that go around the dials, on/off switch etc. Anyone got a 'spare parts' radio that would have these items?

Long shot...I'm after a RHD wiring harness 39 Deluxe. thank you, Brian edit...even an old one I can use as a pattern

I'm building a 39 deluxe coupe. I have two different engine cooling fans [that bolt onto the crank pulley]; one has four blades and much more pitch than the other 'regular' six bladed fan. I've never seen a four bladed fan on any 39 deluxe before. What was the original application for such a...

I'm running some early Edelbrock heads, looks like sparkplug reach is about 1/2". regular H10's are too short. Anyone know a suitable plug for these heads? Thanks

Are MT brakes the same as Boling Bros...is one preferable to the other?

Seeking a pair of finned heads, prefer Edmunds. Or ideally some brand that will fit on stock headstuds. What's out there?

When early fords were equipped with radios or other high electrical draw items, there was available, instead of the regular round cutout, a sorta oval regulator that attached atop the 3 brush generator. i think it contained a cutout and some sort of voltage control. Over the years, from time to...

I attended a swap meet last weekend and came across a relieved 99 engine, sans heads and front timing cover, that exhibited all the features that I'd perform during an engine rebuild; it had been modified for external oil filter, ported, had a steel camshaft that had been reground [evident by...

Is anyone on here running two overdrives in an early Ford? Call me mad if you will, but I currently have a fixation on overdrives. I currently run a Columbia in my 35 sedan...when I first fitted it, it was running a 3.54 ratio, which gave around 2.56:1 in overdrive. Car was a pig off the line...

I'm in the process of setting up a Lincoln [hypoid] rear end. I'm quite familiar with how to set up a banjo rear, having done numerous Fords over the years, but I don't know the specs for backlash between ring and pinion for a Lincoln. Does anyone have the specs? [measured at the spline]. Thank you!

I'm converting a Lincoln [hypoid] rear end to Columbia, hypoid rear ends have special additives, the Columbia contains yellow metal components. So, what oil specification do I put into this thing? Thanks, Brian

Here is what appears to be some kind of exhaust gas heated car heater...never seen anything like it...anyone know how this thing would work?