Search results

I'm offering for sale my 1928 RPU project and ALL the parts I have collected. It started out as a closed cab but I opted to chop off the top. add 8 inches to the body for more leg room and shorten the pickup bed. It has Cling's modified backing plates setup for juice brakes and a Cling's master...

I'm rebuilding a transmission for my RPU. The ****** I have didn't have a throwout bearing on it. Which side of the bearing faces the throw out hub and which faces the clutch plate?

I just recently purchased a motor for my my RPU project. My plans are to have it rebuilt early next year. In the mean time what are some things I can do to it for a dry storage in my unheated garage for the winter. It's sitting on a portable stand and I've currently got the head off. I was going...

I'm rebuilding my transmission and have a couple of questions. I watched the DVD by the Diablo A's before starting this rebuild. On disassembly there weren't any thrust washers with the cluster gears so I reinstalled it that way and I have a 1/16" of play front to back is this normal? Also the...

This handy tool bolts to the bell housing in place of the starter. It engages the flywheel ring gear and allows you to turn your engine in either direction. It also has a heavy duty locking pin which when engaged keeps the motor from turning while you work on it. Price includes shipping in the...

NOS Low Reverse sliding gear A-7100. This is a new in the box gear ready to go. Price includes shipping in the US. Outside of the US will have to charge additional depending on location.

I have three good gears left over from a rebuild. They are a low reverse, second high and reverse idler. All appear to be in good used shape. All three for $150.00 and that will include shipping anywhere in the US. Outside of US I'll have to charge additional depending on location.

1937/39 Ford wish bones split with spring perch removed and bungs welded in. Hangers and hardware included. No tie rod ends. $75.00 plus $24.00 shipping in the US. PM me with any questions. preferred payment with paypal/ SOLD

For Sale, Complete set for front and rear 1946/47 brake shoes with flat sided anchor hole. $65.00 plus $12.00 shipping in the US. SOLD PM me with any questions perfered payment with paypal

1.) 32/33 NOS Ford Model B starter switch with original box $30.00 plus $6.00 shipping in the US. 2.) 2 tooth steering case core for rebuild or parts $25.00 plus $8.00 shipping in the US PM me with any questions. Prefered payment with paypal.

I've installed new spring shackels front and rear. I've noticed the bolts on all go well past the cotter key hole. If I install the castle nut up snug so as not to bind the up and down movement of the shackel the cotter key doesn't engage the nut as it should to keep it from turning. Are the...

I was given two really nice head light buckets for my Model A project. I need to rebuild them with some new parts but I'm seeing different parts for 28-29 vs 30-31 How do I tell which year I have? Each bucket had reflectors with two light sockets in them. Were the buckets different sizes for...

Has the Model A Times magazine given up? Last issue I got was Winter of last year. Tried contacting by email but no response.

Got my rear spring apart and started cleaning up the leafs. The ends of the first spring with the eyelets are gouged pretty bad from rubbing and I found this at the top near the bolt hole. Is this fatigue? Should I scrap it and order a new one?

Well, I've tried mounting my speedo drive to my torque tube but the bolts won't snug down. I tried longer bolts and the same thing won't snug down. The bolt will thread in just fine but the threads on the tube must be worn enough to let it slip when snugging it up. Can I drill out the holes and...

I'm putting the finishing touches on the rear end and went to bolt my speedo drive to the bottom of the torque tube and the new bolts I got for it won't draw down tight. I ran a thread cleaner down through it without issue. How long should the two bolts be? they are about 1 inch long and it...

I'm installing a new tie rod and ends. The original one was missing. What is the length I should start out with on the initial assembly?

I'm installing a new tie rod and ends on my Model A. I'm using the teflon buttons and spring hardware kit. Is there a trick to getting the tie rod ends to "snap" over the metal ball on the steering linkage? I've never done this before so I'm in virgin territory with the tie rod installation.

I'm rebuilding a transmission and the gear cluster needs replaced. I have one I got from an older Model A'r and he had a note on it that says "uses 3 bearings no spacer" He's no longer with us and I've searched and can find no mention on a Model A gear cluster with three bearings and no spacer...

I'm rebuilding a trans I got for my 28 RPU project. I know the bearing on the main shaft needs pressed on but does the bearing on the main drive gear press on? I removed the snap ring and collar on the one that came out of the ****** and I was able to pull the bearing off by hand.