Search results

I,m replacing the trans on my 47 and some says put grease in around u joint, looks like it may oil with trans oil. Its all together now, any info.

I have a 6 volt car and flasher is very slow, i have a new one but can't find it. I can hear it and 4 people can't find it. Any body know the location. George

Have a 47 car 59ab with bad engine was think of putting a 8rt truck engine. Mercury bell housing, think I can use flywheel and clutch anything, thing I would have to change,any other problem. Thanks Also ID # location on 47 car

I just bought a 54Ford car with a 223 6 and there is no oil to rockers. This looks to be a rebuilt engine, every thing is clean. My guess the cam bearing are in wrong, thinking of drilling into bearing, but what if the bottom is also not lined up. Any info. George

I just bought a 54Ford car with a 223 6 and there is no oil to rockers. This looks to be a rebuilt engine, every thing is clean. My guess the cam bearing are in wrong, thinking of drilling into bearing, but what if the bottom is also not lined up. Any info. George

Has a nice running flathead,and have most of the sheet medal to put togother.Winter project.

I bought a tic torque convertor, Sat night special and its says for a pan fill 11 1/2 bolt pattern.Can I use it with case fill with large bellhousing with out any problems.

I was on the hamb reading of a swap meet in nh lee . I have never heard of this meet.Has anybody ever been or heard of this one Nov 13 14 2010.

not for sale

I have a c4 that shifts to quick from 1 to 2nd and 3rd also.I know of 3 that do the same thing.We think its do to the vacume of the flathead maybe to low.I have a 255 8ba with c4 running gears, to equal 2000 rpms at 55 mph.Any feedback on your setup. Thanks.

I have a 49 thur 53 Flathead with the sling shot alt holder.Its a 1 wire.The mounting hole on casing ,on all the gm alts i have hear, is 2" long.From what I see I may have to cut 1/4 off, for the 5/8 pulley to line up.Mine measures 1 3/4".Now under pulleys for fords Speedway has a 1 wire...

I don,t know if this sway bar is on wrong.Were it attaches to axle the sway bar points down.Looks like it should be facing up.Anyone with info please.

I have never driven a stock 52 f1 pu.My 52 f1 now has a toyota ps box.This kit is for 53thur 56 says can be made to fit 48-52.Before I cut the pitman arm want to know what you think.It wants to dart into on coming traffic when hitting bumps.The front end is stock and the hook arm is, center of...

I don't know much about the engine only what i have done.It wouldn,t idle well has autotrans.I put a new timing chain no change,new carb,better but not good.other dist,wires,It sounds like it got a hot cam, running good down road.Has duals and sounds even on both sides.The vacumn is only 14 says...

F1 steering problem, I just put a toyota ps box on, with a 14" steering wheel and and does,t seem to track very well.Someone before me put new front spring and was wonding if angle shim were left out ,or maybe put some in.Someone said more caster may help.I have only driven it about 20 miles...

Hi George here in Midcoast of Maine. Lets see how this works. :)