Search results

im looking for a complete 33 ford hood assembly for my roadster .

On my 33. Were wondering what hole location the brake pedal pull rod pins into ? Top or bottom of the arm on the equalizer bar .

I’m working on a 54 sunliner convertible that has had a 292 y block . I’m looking for someone who has one of these cars, that we can get some photos of the clutch equalizer bar and its connection points . Any help would be greatly appreciated

I am looking for a pair of rear hubs to fit my 26/27 for wire wheels.

May 18th, 2024.. a friend of mine sent me a photo of a T coupe an an auction he was at…. It was for online bid also. So I jumped on , looked at a few crummy photos, and placed a max bid. And , as per normal, my impulse bid won the auction. Luckily for me the auction was only about half...

Is there a choke rod for inside the car ? I have the small wire that goes beside the radiator for hand cranking . But I haven’t found any photos or info on a choke rod for inside the cabin

I’m looking for an exhaust whistle . Or explosion whistle. I have the adapter To go in the head . I just need the whistle and valve .

I’m working on my 29 roadster. Essentially I have an empty tub, with the steel seat pan. I was hoping someone had photos of the original seat wood, and how it fits in the car. Along with some photos of any of the wood on the 29 Thanks

I have a 48 convertible that I’m trying to get the top operational. I have the side latches , but my header center latch was missing. I found a replacement latch , but I’m unsure how it actually attaches and works .

im looking for a matching set of 40 ford wheels. Im really wanting a set with a nice " Patina" look to them. ben 724-301-4736

im looking for the tin cover that bolts from a big truck oil pan to the transmission. im also looking for a good used flywheel. please let me know what you have call or text 724-301-4736 or message thank you ben

i need a set of NOS 1937 flathead ford main bearings. part # 68-6330 .010 oversized. please call 724-301-4736

i have my 37 flathead tore down and headed for the machine shop to get an overhaul.. im trying to figure out what cam i want to run. i want a very aggressive idle. Im not looking for some huge race engine build. its a mild overhaul with stock bore, aluminum heads and a valve job. I want to run...

i need the half round gas pedal bracket with the 2 bolt holes in it for my 34 ford. im understanding that they used this bracket for several years. any help would be appreciated. ben 724-301-4736

Here is a nice pair of 33 car headlights. They are 100% original , some small scuffs that can be polished out. No dents! . Lenses are in good shape , the inner reflectors are pretty decent for the age. We decided to go a different route for this car. $300 shipped in the us Fallow the link...

im looking for the top radiaor bracket off a junk radiator that is for the hood support rods and the hood center strip support. here is a link to what it looks like, thanks http://www.jalopyjournal.com/forum/showthread.php?p=9550029#post9550029

does anyone know a guy that repairs speedometers? i bought one that I knew had a problem so i tore it down and the return spring for the needle is broke and the main input drive is stiff. i have cleaned and oiled it, its better, but still stiff. i dont want to break anything

Here is a good working setup. Brand spankin new model 94 carb. Ran great. Went with a different style downdraft. What you see is what you get. $200 Obo plus the ride Call Sam at 330-647-9822 link to photo: http://www.jalopyjournal.com/forum/showthread.php?t=859220

Original model a manifold and a zenith carb. Excellent runner when on the engine. We switched to a down draft. What you see is what is included Call sam@ 330-647-9822 125$ plus the ride link for photo: http://www.jalopyjournal.com/forum/showthread.php?t=859219

i need a set of front hydraulic style wide 5 drums.. in usable condition please. thank you