Search results

Simple question please. Where can one find a set (8) of Ford Script spark plug wires? Did a 'google' search, some information, 'no' pictures at all. Searched here, no post listed. Thanks

Anybody out there have a Deuce Roadster that has a Cartouche interior kit in it? Could sent me some good pictures of it, please? Thanks.

All you '32 Gurus. Where do you guys go to for original looking Roadster interior? Thanks

HI, have a question reguarding all you steering box lubricant gurus. John Deere Cornhead grease seems to be the 'go-to' lubricant you guys (including later 1930's) use in yer steering boxes. What are your opinions on, Cotton Picker Spindle Grease 00? (Tractor Supply has it) It was highly...

Hello all. On the 293-312 dual action fuel pump The little pin that holds the arm in. There are two little ball bearings on each side of that pin on the pump housing holding the pin in. Question. How does one remove those little balls to drive the pin out? Thanks.

A few years ago, someone gave me a name of a place that re-pops all of the metal ID tags. I barely remember, it was a place that restores farm tractors. They had a large listing for GM, FoMoCo, MoPar, Delco-Remy, Autolite, and most of the aftermarket automotive parts suppliers. Any of you...

Does any one know who makes/sells stainless steel (for bling) '32 Ford king pin lock and spindle stop? I don't need a king pin kit, just the stainless pin and nut for a '32 axle. Also, can someone please explain to me what the differences are between '37 up, locks and nuts, and '32 locks and...

Hi, could someone please give the the measurements, from the top 'inside' frame lip, out to the center of the two holes where the rear hood latch bolts through the fender? I am making brackets to bolt into existing OEM frame holes, to be able to bolt the rear hood latches to, and could use a...

Hello all essential people! Looking for 'one' '48-'52 Ford F-1 pick up 'front' brake drum, 11" x 2" that is no larger than .020 over, or out of round. Anybody happen to have one in their 'stash'? Thanks alumcantandthd@aol.com

Has ANYone here, dismantled then reassembled, 'successfully,' the contact points that is in the back headlight switch housing? I have pictures to show exactly what I am talking about. I want to chrome the 'bail' and both housing pieces for the headlight switch. Thanks

Question: Is there ANY way/procedure, to remove and replace, 'successfully', the contact 'points' in the housing that goes on the bottom of the '32 steering box? I have included a picture. I would like to chrome the 'bail' and both those housings. Thanks.

I gotta unusual question. On e see's the 'Ford/FoMoCo' script printed/painted on several obosolete reproduction (ex, rubber hoses) items listed in the catalogs. Question; how would one go about printing/painting the script on the same item that does not have the script? Is there a...

Is it possible to get a good 'close' measurement, ID and length, of the upper radiator hoses for the '49-'53 Ford/Merc? Please. Thanks

I would like to know the detailed step-by-step 'how to' procedure for removing the steering box and shaft out of the column housing 'down' out of the car with the motor/ pedals still in place, please. I want to remove the original '32 box and shaft, and slide up in a new Hudson unit. Frame...

Where can I be directed to view pictures of the original interiors of '32 fords? Where there any 'factory' pictures showing what was offered in each body style? Say,,,, the standard roadster was offered in 'this' style, and 'this' material and pattern. The deluxe roadster, had 'this', 'this'...

(Not sure if this is the right category for this ad or not) Anybody out there have any left over cans of Turtle Wax, Vinyl Top Wax they quit using? Shake the can the contents still slosh around. Thanks

Wanted a clevis, like the one pictured. Thanks. Merry Christmas, and a happy fifth on the first!

Wanted a clevis, like the one in the pictures. Thank you.

Looking for a oil filler/breather tube from a Edsel motor. 1 3/8" OD diameter, has a 90 degree bend towards the bottom (where fits into the motor), around 11-12" total length, and a mounting bracket spot welded on about 1/2 way. Anybody have anything like that with no dents or severe rust, they...

Looking for a pair of the stamped steel, threaded bumper guard mounts. Turn a '40 Ford bumper guard over, look at the back side. It's that "thing" the outer bumper guard "ears" are folded over on, that a mounting bolt threads into to hold the bumper and guard to the vehicle. Those...