Search results

I see the Ford Barn has a like button as the HAMB does, I always liked to push that button on favorite threads.

Does anyone know what cars or truck had this emblem?

Does anyone sell or rebuild the sway bar ends on a 40 Ford? Drake doesn't sell them. Can they even be rebuilt?

What would be the last year for a Ford truck to have a headlight switch like a model A in the steering wheel? The doors look like a 40 truck but the steering wheel looks like a model A with a horn button in the center.

Who do you recommend to recover running boards. I have looked for old threads on this but can't seem to find any. I wonder who David uses? Thanks for any help.

I'm the 4th owner of this original 40 coupe with 54,800 original miles. It's 99% rust free, solid and runs and drives like a new 40 Ford. It is an original early production model so the hood and pass door are a tight fit. Even has original trunk mat, all straight slot screws, original color was...

A pair of 40's out for some fun on a great day.

This a Rucker overhead valve conversion with two Stromberg 97's

What would be a good rear end ratio to run over the high cost of a Mitchell overdrive unit. This Rucker runs two Stromberg carbs and headers. Don't know anything else about the engine but it sounds healthy. It's in a stock 30 Model A coupe. For instance, would 3:00's be too tall or would a lower...

Here is a picture of the rear of a 40 Ford speedometer unit. Is the brass plug removable for lubing the speedometer or is the small recess for lubing the speedometer. Mine starts bouncing after 40 mph, I have removed the cable and lubed it with speedometer lube but the problem still exists. I'm...

Has anyone ever seen a sheetmetal grille for a 40 Ford before?

This is a fresh engine but done a long time ago, it does run and comes on an engine stand with an 11inch clutch and pressure plate and a 48 trans or a open drive line truck trans. It's a war engine with the raised intake deck and the first year for the crab distributor making it the 100 hp...

I have looked at Van Pelt's web site and any other sites that related to this subject. 1941 Mercury engines should have 19A on the heads, was there any chance that the 19 could be left off and just an A shows? Or does the A say what year or make the engine is, engine appears blue?

I got the 40 coupe out this May from its winter hibernation and it started up fine and ran fine. But it has no power, doesn't smoke or make noises. I did all the normal checks that I will skip to save some time. The only two things seem to be the vacuum running steady in the 12 range which says...

The wiring harness that runs past the horns, three wires stick out, one is power for the horn relay, what are the other two for. The column wire hooks up for the ground wire on the relay, and the two horn wires use up the two left over terminals on the relay so what are the two wires still...

Will the horn be lost if installing a 39 banjo steering wheel on a 40 Ford?

I put an ad in the wanted section on Jan. 27th 2019 and I got two hits. One was just to much of a project with no engine or trans. For a few more dollars, lowdug37 sold me a very sweet mostly originally 50k original miles 5 window coupe. It runs great and looks great and I will be the 4th owner...

Has anyone ever tried to successfully clean and old 79 year old headliner?

I'm looking for a stock 1940 ford 5 window or business coupe in nice shape. I don't want a rusty car but it can have some very minor rust. It doesn't have to run but the engine should look like it can. I would like a stock interior but if its an old roll and pleat or seat covers, that would be...

Who sells parts to rebuild cut-out relay generators, like the dual tapered bearings pre-load adjustment screw which is some kind of soft pot metal with a wire ring to lock it when the adjustment is done? I can't seem to find anyone selling parts except brushes or bearings. Thanks for any help...