Search results

The rear doors on my 30 Town Sedan are rubbing on the curved bottom, About 1/3 up from the bottom of the door. Both sides. The door alignment of all 4 doors to the door opening, to each other, and to the body lines are good. It appears that all it needs is shims under the hinges to move the door...

Just finishing up wood graining my interior trim. What is the correct type of clear? Gloss? Semi-gloss? Satin? Also, comments on what product is durable for sun, sweat, etc. Thanks!

Question. Are the felt window channels glued in place on a 30 Murray town sedan? I see no evidence of clip holes in the door or clips on my existing worn out channels. Thanks! George

I have read some interesting discussion regarding the various A carbs. Could not find anything comparing the Marvel Schebler to the B Zenith. Background. I am looking to increase the power a bit of my current A. Engine is a low mileage overhaul as purchased. Per receipts, counterbalanced crank...

I am currently installing a shortened pitman arm in my 30 Town Sedan. I have noticed that at full aft stroke, the nut that is on the bolt securing the arm to the steering box shaft is hitting the fender above it when the pitman arm is rotated completely aft to the point of hitting the stop bolt...

I have a 30 Town Sedan. New to me. The lower stud on the front engine mount rubs hard on the 3/4 in through hole to the point of being basically a solid mount. Aft edge of the hole. The mount is oriented correctly. There was no brass washer. Vibration is bad as you would suspect. I played with...