Search results

I was hoping to rebuild this fuel-pump. The valves seem to be pressed in? Is this type still rebuild-able?

Weather was nice so I wanted to put a few miles on my pickup. Come along for the ride.:) https://youtu.be/nUvP6WqB6Wo

Not the draft tube, the little short one under the intake? I'm getting close to assembling a Canadian 8BA and need one. Don't see any of the dealers selling one. Worst case scenario, I'll find some small diameter exhaust pipe and split it and weld it. Seems like a lot of trouble tho.

Looks like this could be a fun series to follow. https://youtu.be/7Ua4RyfsFes

Posted over in the V8 section; https://www.fordbarn.com/forum/showthread.php?p=1880616#post1880616

I bought some flathead stuff from a local guy, and he has these parts also. If anyone is interested, I could hook you up with him.

It was in with some flathead stuff I bought, but don't think it's Ford.:confused:

I'm a points and condenser fan myself, but this is intriguing. https://progressionignition.com/shop/ols/products/ford-flathead-v8-small-cap-distributor https://www.youtube.com/watch?time_continue=60&v=neiyDK0wQRM&feature=emb_logo

While trying to get two usable carburetors together, I ran across this one that has a different fuel line fitting. Is this something that came stock or maybe it was used to repair the fuel inlet threads?

My truck needs gas so I drive in to town and fill it with yummy ethanol free. I find that the gas price has dropped from $3.79 a gallon to $2.69. I've got 500 miles on the rebuild and want to change the oil too. https://www.youtube.com/watch?v=l05ZwQ-oFaU&feature=youtu.be

There's really not any restaurants open but a few of the fast-food places have open drive through. Was a beautiful afternoon for a Model A ride. https://www.youtube.com/watch?v=rXKYxqkaabY&t=355s

I've been trying to build up two carbs for a dual setup up. Everything from my stash needs a oversize throttle shaft. I was just about to order another shaft kit when I thought about repairing the old one. I was able to remove the peened over backs of the plate screws without destroying anything...

To alleviate some cabin fever, I took a quick ride to give her a little exercise. Grabbed a camera and took a bit of video. Nothing special, just the sights and sounds of a Model A, and the familiar view down the hood. https://www.youtube.com/watch?v=9p7FOQxGoKg&feature=youtu.be

This engine is a quandary to me. Pistons measure standard but compression ring gap is about .125”. Pistons fit snug in the bores but rings are stuck/glued in the lands. I can hardly catch the ridge with a fingernail, valves and seats (all have seats) look really good, intakes could literally be...

I'm attempting to convert an old Accel distributor and have a couple questions. I can't find the pin that retains the gear for sale anywhere, is it just a roll pin? How you you handle the "reverse rotation" issue? Thanks!:)

Some new wood came with this car, all the wood was removed before I bought it. This piece is for above the rear window. The new part is considerably thicker than what came out. I'm thinking one or the other is for a car with a roll-down window?

Can someone tell me if the brackets that bolt into the windshield header mount inside or outside of the "L" bracket?

Hello Ford Barn, I haven't been around the forums for a while so thought I'd make a little video of a run into town to pick up some propane. It's now sporting early 80's wheels from a E-150 while I try to find 2 more 15x5 "innie" wheels so I can use the stock hubcaps. Lately I've been working...

Looking for a NOS fuel gauge sending unit or a great working used one. Tired of running out of gas!:D Thanks.

I've posted links to earlier parts of this project, this is a very good one. The guy uses a lot of profanity but works miracles with a hammer and dolly. https://www.youtube.com/watch?v=keGDclD4EtA