Search results

:(I need a fuel line kit for a Stewart Warner or Southbend gasoline heater. I really just need the part that has the line on it that goes into the Carb to suck the gas out of the carb. New or used as long as it is serviceable. Thank You Marv

:) I need 1, but will buy 2 windshield frame stainless seam clip. Can anyone help? Please email with price and info. Thank You Marv marvp2239@sbcglobal.net

I have a nice set of 46 thru 48 and maybe other years of :)repo fender skirts i would like to trade for a set of skirts that will fit a 39 Ford sedan. Thanks Marv

Barn members i learned something today. I never knew that Pressure caps of just about any reasonable PSI is easily obtainable, for our old Fords with the large openings like my 39.I took my radiator to a local radiator shop and was going to have a late model radiator cap neck installed and told...

Has anyone on the forum used a Bob Drake 39 Ford Hood Arm & Spring Support? The part no. is 91A-16782/3 and want to know how well it worked for you. Thanks in advance. marv

I have a 39 Ford Standard 2 door sedan. Could any of you Forum tell me the torque setting for the front spring u bolts? Thanks Marv:)

From comments i have heard on the Fordbarn Bob Drake must have made some improvements in his organisation. I ordered a 39 Standard gas tank and lock gas cap on November -1-2013 and received it today November-9. The tank looks good and also the locking gas cap. Good job Bob i am a happy camper.

I need to buy a NOS 46 thru 48 Ford car trans mission mount. If you have one you will sell you can email me at marvp1047@sbcglobal.net Thank You Marv64

Has anyone on the forum used Jamco Suspension for parts, such as a remote fill master cylinder kit? If you have used them or know of them, how are they to deal with? I ordered a remote fill kit for my 39 Ford because i am changing to a newer master cylinder for safety. To make a long story...

I would like to buy the transmission mount crossmember for a 42 to 48 ford car with the mounting bolt holes 8 inches apart. Thank You Marv 64

I need a bearing retainer rear mount for a open driveshaft truck transmission that has a 10 inch distance center to center between the 2 mounting bolt holes. The one i have now is only 8 inches. I am changing my original 39 Ford car transmission and rearend to an open driveshaft. The...

I wanted to put a open drive shaft on my 39 Ford standard but the truck open drive bearing retainer and trans mount measures 8 inches center to center but my car mounts are 10 inches center to center. Is there a different truck mount i can use? Marv

I need help. I would like to know the height of the front top shock absorber adapters for a 39 Ford. If you have one to measure, i would like to know the measurement from the center of the farthest bottom mounting hole to the center of the top shock mount. Thank You marv

I am working on a 39 Ford 2 dr standard sedan. I need a drawing with all the frame measurements on it. I thought i had a book with this in it but i cannot seem to find it. All help will be appreciated. Thank yhouj Marv

I have a 39 Ford Standard 2 door Sedan and i need I front original door panel and a rear side panel for a pattern. They do not have to be perfect or usable , just a pattern for mounting holes. I have lost mine from moving from 1 storage to another over the years. Maybe someone needed them worse...

3 D embosed art work Fellow Ford owners. There is a new American company starting up in Ohio that makes 3 D artwork on 3/16 aluminum plate. They make a replica of your photo of antique Fords etc on a 5" X 6" aluminum plate. They are very nice. If interested check out his web site at...

3 D embosed art work Fellow Ford owners. There is a new American company starting up in Ohio that makes 3 D artwork on 3/16 aluminum plate. They make a replica of your photo of antique Fords etc on a 5" X 6" aluminum plate. They are very nice. If interested check out his web site at...

3 D embosed art work Fellow Ford owners. There is a new American company starting up in Ohio that makes 3 D artwork on 3/16 aluminum plate. They make a replica of your photo of antique Fords etc on a 5" X 6" aluminum plate. They are very nice. If interested check out his web site at...

3 D embosed art work Fellow Ford owners, There is a new American company starting up in Ohio that makes 3 D artwork on 3/16 aluminum plate. They make a replica of your photo of Fords etc on a 5" X 6" aluminum plate. They are very nice. If interested check out his web site at...

Gentleman, i have a stock 39 Ford standard. I am starting to restore it and would like to go with a open driveshaft rearend. The car still has the original rearend under it and is back in the corner of the garage where i cannot get to it. I would like to know what the width of the rearend is...