Search results

Just how do I post from another computer using my name and password? Thanks. Pluck

I am looking for and in need of a 1937 Fordor Convertable Trunk Lid. Thank you. Steve Plucker Walla Walla, WA

OK...so you are on a tour and thinking your cell phone is completly charged for the trip you discover it isn't! Now what? Is there a device one can use, like in the dash light socket, one could plug into, to plug into the charging cord to the cell phone? It would have to work for either 6...

Has anyone ever found the Ford accessory "The Rim Wind and Rim Set Eight Day Clock" in an unrestored Model A Ford assembled as per the instructions on page 308 of the December 1928 Ford Service Bulletins? Pluck

When looking at bolt A-20740 Engine rear support bolt IN THE PARTS PRICE LISTS, which gives the size as 5/16-24 (2 x 1-3/8)...what does the "(2 x 1-3/8)" mean? I know it has to do with the length of the bolt, 1-3/8 I think...but what does the "2" mean? These are the bolts that attach the...

Has anyone completely taken apart a 28-mid 30 CC body for restoration? I mean every part that is riveted to the body and brought it back? I have a complete body which I am not going to disassemble which I will use as an example (which also needs a good restoration also) but also have a ton...

In 1966 I bought my first Model A Ford, A 1929 Standard Coupe which made it about 37 years old at the time. In 2012, I just sold my 1974 Mustang II, Mach 1, which makes it about 38 years old. Thus the two being about the same age at the time of sale. When I looked at the Model A back in...

Was the lower body of the light switch ( light switch cover---lower) the same cover used for the Feb. 1928-Feb. 1929 assembly as it was for the Feb. 1929-March 1930 assembly? Thanks. Pluck

What is the correct length of the stove head bolt for the Radiator Inlet and Outlet Hose Clip Assemblies? Were they the same length for both the larger and smaller clips or was the bolt a different length for each? Thanks. Pluck

Please confirm... Section 18 Judging Standards... Were three taillight brackets in the Revised 1997 Standards mislabled with the wrong part numbers OR are they mislabled in the Revised 2011 Standards? 1997 was bracket A-13471-A...same bracket in 2011 is A-13468; 1997 was bracket...

A few of us over the years have bought Model A's sight unseen either by word of mouth or the now famous internet (ebay). Just how many have been very satisfied with your purchase? But more over...how many of you got screwed in one way or the other and what were the problems? Pluck (who has...

I am in need of A-13470 Rear Tail Light Bracket for my 1929 AA Truck restoration as seen in the Judging Standards, page 18-6 Revised 2011. Also the "steel" rear lamp to go with it. Thanks. Steve Plucker Walla Walla, WA pif@bmi.net 509-749-2211

Just how does one tell the difference between the 28-29 and the 30-31 forged steel front fender brackets? Thanks. Pluck

Why is it when I go to watch a YouTube video that it stops for about 10 seconds, then goes for 10 seconds, then stops, then goes.... It takes about twice as long to see it. Anyone know how to remedy this computer problem? Thanks. Pluck

How is the construction of the museum coming along? Is it on schedual to open in September? Pluck

I need 1 (or 2) AA-3124 Spindle Bolt Locking Pin Nut which is about 1/8 inch longer than the A-3124. Thanks. Pluck

OK Guys... Just what is the difference between the A-3122 and AA-3122 Spindle Bolt Locking Pin? I know the AA-3124 Spindle Bolt Locking Pin Nut is "approximately 1/8 inch longer" than the A-3124...but what about the Pin? Is the "AA" pin longer in the threaded area than the "A" pin? In...

I have at least two different styles of the A-3123 Spindle Bolt Bearing Assembly and would like to know just which one was THE original product for the Model A. The first one has no part number and has on the inside, ball bearings which are visable; The second one has no part number or...

Does anyone have a photo of the Rear Brake Cam Shaft Extension AA-2237-C (RH)/AA-2238-C (LH)? Thanks. Pluck

What hub came first...the one with the "lip" around the spindle bearing shaft area OR the one without the "lip"? When was the cut-off date? Thank you. Pluck