Search results

April 28, 2024, Sunday, Trexlertown, Pennsylvania. The annual Steve Ryan Model A/AA Show and Swap Meet - hosted by the Lehigh Valley Model A Club and the Goodwill Volunteer Fire Company. 7723 Hamilton Blvd, a short drive from Routes 78 and 222. 9:00 a.m. to 3:00 p.m. rain or shine. No...

Sunday, April 30, 2023, 9 am to 3 pm in Trexlertown, PA. All vintage Fords from 1903-1942 welcomed. Dust off those early Ford V8's and enjoy a day of fun.

Sunday, April 30, 2023 from 9 am - 3 pm in Trexlertown, PA. Vintage Fords from 1903 - 1942 welcomed. Dust off those Model T's and enjoy a day of fun and fellowship.

April 30, 2023, Sunday, 9 am to 3 pm in Trexlertown, PA. All vintage Fords from 1903 - 1942 also welcomed. Get your car or truck running and enjoy a day of fellowship.

The wiper came separate from the car (1931 S/W Fordor). The shaft on our car's vacuum wiper is about 3" long and about 1/4" in diameter. About an inch from the end where the wiper arm attaches in a hole, the shaft is enlarged to 1/2" in diameter for about 1/2" long. Then, the shaft goes back...

You are invited. Dust off those Model A's. Please spread the word. April 24, 2022 Sunday • 9 am to 3pm Trexlertown, PA Free Admission Free Registration Pin Striping by Jim Brand Paved Parking for Show Cars Swap Meet Concessions Rain or Shine Co-Host: LVMAC and the Goodwill Volunteer...

I would appreciate any advice/suggestions regarding the installation of new safety glass and window channels in the rear doors of a 1931 S/W Fordor. The tops of these doors do not come off. The window riser mechanism is currently attached to the rear door. Thanks very much for any advice. I...

1931 Original Left Front Fender sandblasted and primed. I can email photos if you let me know. Thank you.

Fender needs work where it was welded. Have photos, but couldn't attach them.

For Sale: Model A Ford 1931 Left Front Fender, new well installed. Also, 1931 Left & Right Running Board Splash Shields. Items are in fair condition. Photos available.

Do you know the dimensions for the 1931 S/W Fordor Town Sedan Wood Rear Side Armrest Brackets? Based on the dimensions, I'd like to get a pair made for our car. Thanks very much.

Wanted 1931 Model A Ford S/W Fordor Wood Rear Armrest Brackets, either reproduction or original. Thanks very much.

The large rear side window in our 1931 Tudor has developed a crack and needs to be replaced. The car is upholstered and driven. Does anyone have a list of all the steps needed to remove the large rear side window? Also, what advice and steps are required to install the new side replacement...

Event-date:Sunday, April 26, 2020 Event-Time: 9 am to 3 pm Event-host:Lehigh Valley Model "A" Club & Good Will Fire Company Event-description:Free Admission. Free Registration. Hubley Model Car Display. Technical Presentation. Pin Striping by Jim Brand. Paved Parking for Show/Display Cars. An...

The horn is mounted on the car and works fine when temporarily wired directly to the battery. The issue seems to be the connection at the bottom of the steering column in the light switch body. Does anyone know how to verify this and how to fix the problem? Thank you for your help.

Wanted a right side (passenger) rear fender for a 1931 S/W Fordor Sedan. Also wanted; the bottom metal body panel at the rear of the body. This panel is located between the two rear fenders and is about six inches high. Thank you.

Is there a template or information regarding the Hole Size & Location on a 1931 Running Board Shield for the Well Fender Arm to fit through? Also, do you have any suggestions/advice from prior experience? The prior owner has had a well installed in the front fender, but the running board shield...

Please help with where the metal Dome Light Wire Guard is positioned/mounted on a 1931 S/W Fordor? Thank you.

Does anyone have an Oval Dome Light that would fit a 1931 S/W Fordor for sale? It mounts above the rear window.

Our 1931 S/W Fordor has a wood block above the rear window for a Dome Light. (The car was disassembled by the previous owner.) Please help with the following: 1) Does the Repro Dome Light get mounted flush to the wood block with screws from the inside of the light? 2) Does an On/Off Switch get...