Search results

Hi Everyone, I don't post much on here, more of a lurker. I have bought and sold a bit, and tried to contribute where I could. I have some stuff listed for sale, and I wanted to publicly apologize to anyone that reached out to me over the past few months and never heard back. I had some...

I'm looking for a 1935 or 1936 dash. It needs to be the Right Hand Drive version. Preferably with the glove box door. Open or closed car does not matter. Thanks!

These are rare aftermarket / dealer accessory Model A side mounts. They came off a 1929 Ford Model A that I have from Uruguay. I have two, one for each side. The bracket bolts to the cowl, and one end of the rod bolts into the fender. The wing nut tightens down the clamp on the tire. These are...

SOLD Not sure what these are called, but they are the aprons that hang under the bottom of the Model A frame and close in on the engine oil pan. These came off a 1929 Model A I have. $20 plus shipping.

Aussie, NZ and English gentlemen take note! Here is a Model A transmission for a Right Hand Drive car. This came out of a 29 phaeton that I have. Upgrading to a later transmission. The transmission spins and seems to be in good shape. I have NOT opened it to check internally, though the shifter...

Front bumper brackets off a 29 Model A. $10 plus shipping.

Attention English, Aussie and NZ restorers. I have a Right Hand Drive Model A steering column and box that I pulled out of my 1929 project. Steering box seems tight and without slop. The steering wheel is not included, but the gas pedal and pitman arm are. This is a good box for your next...

Hi all, I don't do much posting on here, but I do read lots and try to glean information when I can. I had a question regarding side mounts on model A chassis. I have a bare frame in my garage that is a dual sidemount. I know this is a North American frame. The sidemounts are the standard...

At an estate auction for a local early Ford hoarder and longtime Ford mechanic, I came across a box of Mechanic's Handbooks issued by Ford of Canada. The books I have were issued in 1955, 1956, 1957, 1958, 1959 and 1960 and cover different aspects of Ford maintenance and repair. They feature...

At an estate auction for a local early Ford hoarder and longtime Ford mechanic, I came across a box of Mechanic's Handbooks issued by Ford of Canada. The books I have were issued in 1955, 1956, 1957, 1958, 1959 and 1960 and cover different aspects of Ford maintenance and repair. They feature...

At an estate auction for a local early Ford hoarder and longtime Ford mechanic, I came across a box of Mechanic's Handbooks issued by Ford of Canada. The books I have were issued in 1955, 1956, 1957, 1958, 1959 and 1960 and cover different aspects of Ford maintenance and repair. They feature...

At an estate auction for a local early Ford hoarder and longtime Ford mechanic, I came across a box of Mechanic's Handbooks issued by Ford of Canada. The books I have were issued in 1955, 1956, 1957, 1958, 1959 and 1960 and cover different aspects of Ford maintenance and repair. They feature...

At an estate auction for a local early Ford hoarder and longtime Ford mechanic, I came across a box of Mechanic's Handbooks issued by Ford of Canada. The books I have were issued in 1955, 1956, 1957, 1958, 1959 and 1960 and cover different aspects of Ford maintenance and repair. They feature...

I'm on the hunt for some right hand drive parts... I'm looking for a right hand drive, column shifted transmission from a 40-48 Ford, and a right hand drive steering box from a 40-48 Ford OR a right hand drive steering column/box from a F1 Ford truck. Any leads are appreciated! Thanks.

This is a Elmira N.Y. 97 carb - made as a replacement carb for Holley 94's requiring vacuum signal to the distributor. It is a Stromberg 97 carb, though the boss where the '97' would usually go, is blank. These were sold by places like Western Auto during the early to mid 50s. This carb is...

I have a set of Cast Iron front backing plates that came off my 1934 Ford pickup. These were working and stopping when I removed them. The backing plates are fully functional and the brake shoes appear to have lots of life left. Everything is dirty from road use, but complete. Will part trade...

SOLD! Fenton intake for the Ford flathead. Perfect for the 1932-1948 flatheads, though it will also work on the 1949-1953 flatheads as well. This one is very nice overall with no chips or visible cracks. All holes, ports and passages look good. However, the generator mount holes have had...

SOLD! These mechanical brake actuating rods came out of my 34 Ford chassis. They should be the same for all passenger chassis from 1933 and 1934. There are 4 total. All of the 'eyes' look good. The rods for the two front ones measure 51-3/4" long and the two rear ones measure 61-3/4" long. All...

Slow your woah! This brake equalizer came out of my 1934 ford pickup. However, it's the same equalizer used in all 33 and 34 passenger vehicles. This one is a bit dirty, but works perfectly fine. It even comes with stock Henry Ford bolts! Buyer pays shipping.

SOLD! A couple of parts that came out of the floor of my 1934 Ford pickup. If someone wants to buy all three, I'll make a package deal. $50 + shipping costs. 1. Steering Column surround. Looks like one of the tips is slightly broken off. Not sure if the one side had been cut. Looking to get...