Search results

I had to completely change the subframe/subassembly due to rust, same with the “c” pillar. I’ve used rivets for all the crossmembers to Subrails but am having trouble getting straight line access to the bottom of the door post and “c” pillar to buck rivets. Does anyone have an idea on fastening...

I have a 31 Tudor and have all my parts primed and ready to reassemble. I’m baffled of what this part is and where does it go on the car?

I’m in need of a supplier of the metal piece that attaches to the vertical support and the subassembly. This part also has the slot for the rear quarter kick panel, Please see photo. If you have one for sale or know of a supplier please PM me, Thank you, Gary

I’m in the process of repairing/replacing an rear inner wheel well for my 31 Tudor. One side is repairable the other has to be replaced. I’m Soliciting advice on whether to lap or butt weld the patch panel that I bought years ago. Also, should I stitch weld the joint or spot weld? Any help...

31 Tudor “C” pillar placement to subrail My subrail has completely rusted away where the “C” pillar is rivited to the subrail. I am building a complete subframe and need an exact measurement of where the 3 holes are located on the subrails. Can anyone help me, please?

Wanted; 31 passenger side front fender preferably welled and within a days drive from Tuscaloosa L, please PM me. Thank you, Gary

Wanted; a good restorable passenger fender, preferably welled and within a days drive of Tuscaloosa Al. PM me. Thank you Gary

I’m in need of a good restorable passenger side welled fender preferably within a days drive of Tuscaloosa Al. Please PM me, Thank you, Gary

I’ve looked through the judging guide and can’t find a reference on whether or not there was an option for a mohair interior on a 31 standard Tudor. Mine is a Canadian built car and I found no reference there either. When I disassembled the interior I did find swatches of brown mohair that...

I’m in the process of restoring a 31 Canadian built Tudor, without an indented firewall. During the process I uncovered that the original interior was brown mohair. My question is: did the standard tudor have an option where it could be ordered with mohair interior. Could Someone smarter than me...

I’m in need of a 30/31 hood for my Tudor project. Please no rust through or big dents. Thank you, Gary

I’m in need of a good 31 hood. No bends, dents or heavy rust please. Thank yo, Gary

31 Tudor “C” pillar I need a picture Of the bottom part of the pillar/brace that runs from the roof down behind the quarter window and attaches to the subrail of a Tudor. Mine is completely rusted Away and I would like to replicate it, if I can. I would certainly like to buy A good one if I...

30/31 Tudor “C” pillar I’m in need of both passenger and drivers side “C” pillar. That’s the big brace that runs from roof through rear wheel well to subrail on a Tudor sedan. A good picture of the end that attaches to subrail would also be helpful. Thank you, Gary

I’m in need of a pair of rear braces for 30/31 Tudor. This is the brace that runs from roof to subrail and through the wheel well.

Rear “C pillar” 31 Tudor Help, I have to rebuild the bottom of a severely rusted bottom of both of the rear pillars of my 31 Tudor. I would greatly appreciate a picture (profile and straight on) of one. Or a sketch with measurement for The holes. Thank you, Gary

I’m restoring 31 Tudor and found the Drivers And passengers side rear quarter braces/brackets are totally rusted out at bottom. I would like to find good ones, if possible. Thank you, Gary

I’m in need of a 30/31 Tudor windshield, no rust through please. pm me please

Trying to stay with original parts for 31 tudor. Looking for subrails, rear seat frame and floor pans.

31 Subrail extension. I’m looking for a good original 30/31 passenger Subrail extension.