Search results

I'm trying to locate the transmission adaptor to install a "39 transmission behind my "31 engine. Specialty Ford Parts, who are out of business, show one in their old catalog #7501. Are there any adaptor out there that is available? Thanks in advance.

There is a right way and a wrong way to do this. At one time I was in possession of the instructions. Guess what! Anyone out there with HELP. Something with compressing the spring to install the pin. Thanks, Roger

Ok, here is my problem. Purchased a '39/'40 engine the other day without a starter attached. Had one in my inventory. The starter drive gear is too large to engage with the flywheel. By the way this isn't my first flathead experience. Had another starter which was installed. Same results...

Does anyone know of a manufacturer that makes a radiator fan shroud for 1951 fords. Didn't the 51 to 53 ford pickups have a shroud? My goal is to get a shroud for my 1951 ford V/8. Any suggestions appreciated.

Wanted to buy. Upper and lower radiator tanks for 1951 Ford V/8 standard transmission. Email: rogwgerow@csharter,net. Thanks, Roger

Wanted. Upper and lower radiator tanks only, for 1951 Ford standard transmission. Replay to rogwgerow@charter.net. Thanks, Roger

I'm in need of the drive gear assembly for my 1955 mercury with merc-o-matic transmission. The drive gear is different than the one for standard transmission. It's the Y block series. Thanks, Roger

Purchased a 39/40 ford engine a while back. No starter came with it. Has 59AB heads. This tells me there probably are some modifications to this engine. I have tried three different starters using the bracket to the pan rail. Everything lines up perfectly on the outside. Here is the issue...

I have a big smile on my face every time I drive my 1951 Ford coupe. He have lots of sunny days here. Only one problem. The left and right sun visors don't stay up very well. Is there a way to tighten them up to prevent them from coming down? HELP!

Bought a39/40 without a starter the other day. I installed a known good starter but there is a problem. From what I can see, the cover over the end is missing, ;the drive gear appears to striking the flywheel preventing it from engaging the flywheel teeth! Tried another good starter, same...

Have you ever dropped the air cleaner wing nut on top of the engine. Well I did and it crawled away. Anyway, what is the thread size? The local parts store probably has one. Thanks In Advance!

Search did not locate information. I've removed entire speedometer cable and housing. They have been cleaned up with solvent. Now, open to suggestions on what to use for lubrication. HELP!

My age is showing. I need to purchase a wiring harness for my overdrive and headlights under the hood. For the life of me I'm unable to come up with the names of a couple of suppliers. HELP!

I drive an original 1951 Ford Custon Coupe. Had an intermittent short in the horn wiring. I replaced the wire from steering to exit at end of steering column. Also removed horns, mounted to left side under the hood for a fresh coat of paint. This was done several months ago. Anyway since...

There is a for sale ad on a website that maybe what I need. The problem is the dimensions are given in millameters. The length is given as 210MM and diameter as 45MM. By the picture the would be ok. It's the diameter that I need in inches. These lower hoses are for my 1951 Ford V8 which...

My instruction for installation of Teds brake kit have gone byby. Would sure appreciate it if someone could e-mail the instructions my way. E-mail address is: rogwgerow@charter.net. (1931 Ford Model A) Thanks

I'm in need of the installation instructions for Flatheadteds brake kit for the '28/'31 Model A Ford. Anyone out there that can help? Thanks in advance.

I drive an all stock 1951 Ford Coupe 6 volt positive ground. Recently installed a 6 volt PowerMaster alternator. Works just fine. Now the ammeter shows no charging. Called the tech dept and the individual said don't worry about it! Not a good answer in my book. I'm now trying to locate a 6...

Reference catalog C&G Early Ford Parts page 140. The '32 to '53 ford part number is B-11350 10, except automatic, 10 teeth. "51 to '53 ford part number !CM-11350 for V8 with automatic. Question, how many teeth on this one and what is the diameter?

My reference magazine is C&G catalog. On page 140 they ;show two different ones. B-11350 10 teeth except automatic. 1CM-11350 for the automatic. Question, how many teeth does this one have? Is it also smaller in diameter?