Search results

Looking to buy 4 16' ford wire wheels 5 on 5 1/2 bolt pattern.Wheels should spin true, no excessive rusting or pitting or repairs.No junk. Seller would be interested in helping with shipping.Wheels would be priced accordingly with condition. Thank You

Wanted to buy Emergency Brake handle for a 30,31 coupe.Original and in working condition.Priced accordingly. Thanks

Looking for a complete gas pedal and throttle linkage assembly for a AV8 project Priced accordingly with pics Thanks

Looking for a set of spark plug wire looms to use with a crab Distributor.Prefer in good condition and closer to the east coast to keep shipping reasonable Thanks in advance

I know its not exactly Ford Barn friendly,but theres enough guys running them here even if they don't want to talk about it.I'm looking to purchase a good overhaul manual for the Gm T-5.Anyone with any past experience on a good one would be appreciated.Either post on the thread on send me a Pm...

Looking for a flathead dipstick The one I need measures 14 5/8 from the felt to the end.The one I checked that had the correct measurment had 8rt stamped on the dipstick. Should be in reasonable condition and priced accordingly Thanks Bill

Does anyone have pictures or available sources for the brake line mounting clips that would have held the brake lines going to the front along the frame and crossmember and down the radius rods to the rear.I'm not looking for a particular year(maybe there all the same) as long as they are early...

I was reluctant to post but here goes.I have a set of rear Lincoln backing plates that I am putting on a 40 ford rear.I am looking for a source for the E-Brake cables.These are the style that are held in with 2 bolts.I'm unsure if the cover is part of the cable or if it is seperate.I've looked...

Looking for a canister oil filter that bolts to firewall with mounting brackets.Similar in size to original ford 8ba filter.Priced accordingly Thanks Bill I found one.Thanks guys

I want to post a wanted ad for a generator pulley.Are all not threaded 5/8 belt width pulleys the same.If not what years would I be looking for.I have a generator with a narrow pulley held on with the nut and lockwasher and want to replace it with a wide pulley. Thanks in advance Bill

I'm trying to send pictures to a PM or the Email feature here on the barn.I'm obviously not smart enough to do it my self.This probably has been covered before(many times).If someone could point me in that direction or explain in terms that even a simple computer person could understand I would...

Just got my clock back from "The Clock Works".Looks like new and after 3 hours appears to be keeping good time:) Just how long will these clocks run on a wind? I didn't wind it all the way as the mainspring was broke in the other that I sent and didn't want to do that again. Thanks Bill

Looking for a 1940 ford glovebox clock,in reasonable condition and priced accordingly. Thanks Bill

Anyone ever been to the swapmeet at the Big e in West Springfield Mass? Apparently its been going on for 35 years and was "nationally recognized as one of the best by Hemmings Motor News". It is on Jan 19th and 20th.Might be fun to break up the winter Happy New Year Bill

Looking for just the cover ,adjusting bolt and nut for a f-1 steering box Thanks Bill

I have some questions in regards to an aftermarket intake and carbs for my flathead, should I take it elsewhere.Don't want to upset the locals.I kinda like it here Bill

I've been reading many different post in regards to the different tooth count inside the "turtle housing in relation to rear end ratio,tire size etc.Many post refer to the charts in the "green bible".Are these charts available online? or here on the barn to review myself.I searched but was...

I have what I believe to be a 49 to 53 flywheel.Truck or car I'm not sure.It has 3 sets of 2 holes ( not the evenly spaced holes around the flywheel) I'm attempting to mount my 10 1/2 pressure plate to the flywheel the bolt pattern on the pp is correct to the flywheel,but the thread size in the...

I believe that this is a 1950 or 1951 mercury pan ? On the rear of the pan are 3 fine thread bolts sticking out. These bolts are 3/8 thread. What was the purpose of these bolts? It appears to be factory installed as the head of the bolts are visible through the pan.If not needed can it be...