Search results

Anyone else unable to load the yblocksforever.com site? For the last couple of days I get 503 unable to load message. Ben

Does anyone know the weight of the T85/R11 transmission? Going to install one in 55 Crown. My Son has a lift so getting it up is no problem but lifting it may be. Thanks Ben

I am going to replace my T86, R10 overdrive with a T85 R11. The T85 doesn't have the two shift arms on it. Will the arms from the T86 interchange or will I have to fabricate them? Thanks for any info. Ben

I am installing a 57 pass. car drive shaft so my T85 will not require a shortened shaft. 1955 Crown Vic.. When I got shaft, all u joints were out. I got new u joints but this is a tapered shaft and I need to know which end goes to transmission. Don't want to install transmission yoke on wrong...

Anybody have any information on KULTULZ? Haven't seen him on here in a while and don't know if he couldn't make bail or if his wife finally caught him in a corner. Hope he isn't ill or something. Ben

Any body else having trouble logging into the Crown Victoria site? Ben

On the T86 it looks like the speedometer gear meshes on the bottom of the drive gear and on the T 85 it looks like it meshes on the top. Does this mean that the 86 speedometer gear won't work in the 85? Seems like it would be turning the opposite direction if it even meshes. Any work around...

My 55 Crown currently has a T86 overdrive with a R10 OD unit. I acquired a T85 with R11 OD that I want to upgrade to. The T86 is 28 inches long and the T85 is 34 1/2 inches long. Don't know if the trans mount will line up or not yet. Did Ford offer the T85 in 55 or 56? Other wise I will...

Can anyone identify this? Son said it fell out of his FMX transmission when he removed the valve body and pump. Said it was about 1 1/2 inches long. Out of a 70 Mustang.

Does anyone have pictures showing the 2 tooth sector (55) and the three tooth sector (56)? Would like to see the differences. KULTULZ probably has pictures, he seems to have anything. Thanks, Ben

I rebuilt the steering box on my 55 and when I reinstalled it, my wheel is about 3 inches counter clock wise to level. I assume (but we all know what that does) that the removal of play in box changed the position of the steering wheel with wheels straight. My 55 service manual says to set...

Does anyone have an exploded view of the springs and cups on the steering arm of a 55? This is the part where the pitman arm ball stud goes in. Thanks, Ben

In the process of rebuilding my 55 steering box. Factory manual says to use T52L-3526-Bad to remove sector shaft bearings and T52L-3526-AAD to install bearings. From the picture it looks like bearings are removed out the sector arm end of the housing but not enough detail to see how. Does...

I have a set of wheels supposedly from a 1953 Ford. They have riveted centers to rim. Will these rims be compatible with tubeless tires or will only welded wheels work? Thanks, Ben