Search results

SOLD! Mac built this for me a little over a year ago. Due to health and age issues it didn't get installed. Solenoid is 12volt. I think I have everything needed to install it; wiring, relay, cable, kickdown etc. It's fresh and ready to go!

I've had trouble getting a good seal until I found these: aluminum washer with gasket/rubber on both sides. NAPA # 704 1448

SOLD! Price reduced! Cast bell housing, all threads good. Free shipping in continental US

SOLD Reduced to sell! Prepaid shipping in lower 48 New, never installed. Dakota Digital 12v VHX-49F-S-B gauges, clock and hardware to use with stock transmission. These are silver w/blue lighting.

I need the spring that keeps the clutch release lever from rattling. Part #8A-7562-B in the picture. (click on picture to enlarge) Thanks for your help!

When gassing up my coupe I have to fill it as slow as the pump will go or it gushes back out and down the side of the car. the car is very original as far as I know. Is the tube in the fill pipe stock for this car? Vent pipe maybe? Is it an anti siphon device of some sort? Any ideas on how...

Cast iron bell housing. FREE SHIPPING in continental US. All threads good.

Dakota Digital VHX Gauges & Clock These are new. Main cluster and all the parts to use it is $799 (reg $850) Clock is $125 (reg $ 160) Speedo adaptor for stock 3 speed $100 (reg $125) not shown. Or package price for all $ 850 I'll pay shipping on these items in the lower 48.

NOT MY CAR - I saw this this morning and thought someone may be looking for one of these! https://helena.craigslist.org/ctd/d/helena-1941-lincoln-zephyr-own-piece-of/7596432482.html

WTB - For my '49 Coupe - the bracket the holds the OD cable to the dash. Will take with or without the overdrive cable. Thanks for your help!

This is sold. Thanks for your interest. Flat-o-Matic kit for flatheads to C4 Includes basic part for the early V8. converter is 26 spline, later C4 trans I have the parts to use it with and 8Ba at extra cost. Price for basic kit is $695 purchaser pays shipping costs. C4 not included.

Asking for a friend thinking of rebuilding one of these engines Are all 427 side oiler blocks the same bore and stroke? Is the 3.784 stroke and 4.232 bore? Thanks for your help.

Not mine and I have no interest in it what so ever. Just thought it looks like a reasonable project car someone might like. https://spokane.craigslist.org/pts/7552058674.html

OBD2 & OBD1 code reader & tool kit Price reduced; $75 and postage is on me? New, never used, complete. OBD1 cars thru '95 and all OBD2 cars. One case holds the main unit and instructions, the other all the cords and adaptors. Equus 3120 Older unit and I don't remember when I bought this. $99...

Sold, thank you. Assorted styles of cage nuts. Mostly 5/16 fine. about 20 or so "d" /clinch nuts 1/4 20 about 15 3/8 washers and some 5/16 pickup bed/body washers. $20 and I'll pay postage.

Memory jogger I thought some of you may enjoy! it contains older Fords as well as others. Enjoy! http://biggeekdad.com/2013/01/the-best-of-times/

Hi guys, What have you done to take up the slop at the lower end of the shift rods? I suppose heim joints would work but just curious what others have done. I did some backyard engineering and came up with a temporary solution. Made an oblong bushing out of stuff I had here. Crazy I know but...

Hi guys, Wanted to say thanks to everyone one the Barn that has posted about clutch chatter. It was extremely helpful. Here is what I found: The throwout bearing should be carefully examined at the point the bearing seats to the base of the hub. It was the issue for my violent chatter. I...

Hi guys, I picked up a '49 coupe recently and was told I was the third owner. So a few questions from those of you that know please, Are these floor mats and the trunk mat original? the floor under the mat is clean and black as is under the trunk mat...is that original. The door panel seems...

I'm in need of a rear spring hanger...used...any condition as long as it will hold both spring pins. This is to make one of my F-100's a roller. This truck won't be driven with this in place. Price with shipping to 59733 please. Thanks for your help!