Search results

Im redoing completely the rear brakes down to even new rails. I have the drivers side done, but cant get the drum on. It slides on then stops about 3/4" from the back plate. I took a couple pics of the entire backing plate and then one of the ebrake where it meets the stops that are in the 2...

I just installed one of the seals in the new drum. I repacked the bearing and dropped it in. I then installed the seal. I think I may have gone a little far with the seal as its about 1/8" below the snap ring. So my question is should the entire bearing rotate inside or is the seal is...

I'm going to replace both heavy worn rear tracks on my 29 Tudor. It seems simple enough to grind off the old rivets but have two questions. I plan on buying the new track from snyders unless there are better ones out there. I know I have to red hot the new rivets but What technique to get the...

Well been doing the front brakes today and replaced most of the internals including the worn adjusting wedge. Now the problem is installing the wedge dust cover. I bought new ones from snyders and they seem to be the same size but when I go to install them they are slightly bigger than the...

Im having a hard time finding someone that can turn my drums in southern orange county. The few places I have found say they don't. I'm am also hoping they my arch the shoes if possible. Thanks Tony

I had another thread about a stop lamp that I pulled out of the unit and when I went to replace, the new unit did not match to the bolts. I was told I had a different transmission. I did some researchand found the Mitchell Transmission and am curious how to identify it. Here is a pic of...

Still new here and I have a 29 Tudor that is still 6v with a nu-Rex alternator that was on the car when i bought it. Sadly this weakened I had to use my AAA card to get home. She completely died on me In a left turn bay. I later found that I have a 15amp fuse on the starter that blew. I am...

Well my 29 Tudor just arrived that I bought. I took her for my first spin and all is well. I happen to live in South Orange County and wonder if someone who has a bit of knowledge on this model would not mind taking a look at her to make sure she is road safe. I plan on taking the wife and...

First off I am new here and this is my first post. I just purchased my 29 Tudor and we are happy with her, but we need to make one change VERY quick. We have a 2 1/2 year old and want to take him out for the weekend drives as well, but he needs to sit in a child seat. Since there are no...