Search results

I am in the process of putting my 1957 292 back together after a refreshing and the timing gears/chain is next. Should the gears slide onto the shafts easily or should there be resistance. Mine slide on easy about half way then stop cold. The cam is new and the crank is original. Also, how far...

I have a one inch carb spacer with a large vac port out the back from a 351 2v ford. I am now running a 2100 motorcraft 2v carb on my 292 without a pvc. I like the carb and am wondering if I can use the spacer and put in a pvc in that flat spot at the rear of the valley pan. I would also build...

I successfully removed the engine and trans. from my 1956 vic for rebuild. The engine turns out to be from a 1957, a 292 and a fordomatic. when I tore the engine apart, I found that all the pistons had two rings in the center groove, what looks to be a regular ring and a very thin one, much like...

hi guys,another newbie here, i'm trying to fix the door hinges on my 56 Victoria. the rt. door is sagging and can be wiggled up and down. I got new hinge pins and bushings from Macs. I took apart both hinges and I don't think there are any old bushings to remove. my question is,where do the new...