Search results

Early V8 Hub Caps (4) repop. In great shape no dents . $100. Cash . Pick up only , near Danbury CT airport . Tues-Thurs 9-5

Can any one recall which year Subaru thermostat we use in our V8 flathead I have in my 59 but can’t recall year and which model .

Hoping someone from the Barn could help with suggestions for a family friendly Hotel / Air BNB or BB for this summer in the Carlisle Pa. area . Thanks

Delete

So down at Jersey shore it looked to me that some of the A’s looked like they have Posi traction . How’s that accomplice (weld the gears) Any one done this to a model A rear banjo . Looked to me some of those old model A’s hooked up pretty good with both wheels spinning in the sand .

Let’s talk about V8 flathead head gasket I see I the ole web there’s company’s that make various thickness composite head gaskets . Anyone have any experience using them ? I see there gasket thickness over .100 Could be away to resurrect some of these mint vintage wall hangers . Let’s here...

Looking to buy outright a 59ab flywheel in the SW CT area only . For pick up ... Anyone holding ... Thanks again Ford Barn ....

I have a recondition 8ba flywheel New ring gear and resurfaced . Looking to trade for a lightened 59ab in same condition . new ring gear and resurfaced and lightened . In south west New England area . Pick up only ... Thank you Mr Ford Barn ....

No laughing , 😊 looking for a mint oil pan for my budget build 59AB Pick up in southern New England . Don’t know if you don’t ask . I hear tell about all these cracked blocks, , should Be lots of budget priced pans in great shape .

Another 53’ F100 steering box question Evening folks , been searching for information on F100 steering box . Question Are the worm gear keyed ,if not I’m assuming just press fit . I guess I can cut the old one off with grinding cut wheel and oven heat the worm and freeze the shaft for assembly...

On a 81A big A head does anyone have some experience with how much material can be die grind out for valve clearance . This motor (59ab) has a lift of .365 and to achieve the piston to head clearance I have to mill the head .80 + thou. Another question can I angle mill the head leaving some...

I know we have beat this to death on other threads but thought I would post couple pictures of how these off shore lifters fail .

Project 59 motor the crank doesn’t have any clean outs, Can’t be Ford . Who crank can it be ?

So a 59AB I’ve been messing with has offset piston ,( all new) The crank has floaty rod bearings. Don’t know the history other then it was just rebuilt by unknown Motor was overheating . I’ve pulled rust and clay out of the block, enough to fill A peanut butter jar. EveryThing been decked and...

59AB followed me home last week . Trying to pice some history of this motor before I start ripping into it . I noticed it has A heads on the motor. Don’t know the reason Does anyone know if there advantage . I thought A head would be lower compression . Would that head be from a 24 stud 221...

V8 K Member Vern’s wanted Want to buy for my 85 year old buddy one of Vern’s V8 K member . I’ve seen them for sale , looking to save some money hopefully . Full flight is out of our range .

For Sale is 1939 Ford Coupe in very good condition . Sale Price $22500. PM me with question . Photo's and Video by request . Serious Inquries only .

I sent my Helmet to Alabama to fine tune the distributor and want to leave my approval if I may for a great job . The 40’ Flathead come to life and runs smooth 👍

Who here on the Barn can spin my 40’ Helmet distributor . previous owner cleaned up the helmet and installed new points and Condenser.Points gaped At .16 but would like to have someone spin on machine

I did some horse trading for a 40' V8 . The Disturbutor (Helmet) was missing the coil. My buddy gave me a stock Ford one . He also told me that there a repop adaptor to be able to use a modern coil . My question is input power if I'm running 6 volt position ground on the Ford stock coil . Should...