Search results

I have backing plates stamped FoMoCo and Bendix 3071 76. Does anyone know what these fit? Thanks

‘39 Standard Generator to 12V In converting a ‘39 Standard Generator to 12 Volts, what is the correct 12V Field Coils to use? Thanks So Much.

I am restoring a '32 Column Drop and having trouble trying to remove the Ignition Lock Cylinder from the Column Drop. The pin has been drilled out and has been soaking in PB Blaster for a couple of days. The key is in, but unable to turn cylinder and pull out. Any help on how to get Cylinder...

Does the Drake Gas Tank for a 1940 now fit the same as a original? Thanks

I have 4 new Stromberg 97 carbs with the S-jet Fuel Inlets and all 4 S-jets stick. These are on two different 8ba motors with 2x2 intakes and electric fuel pumps. After sitting for several weeks, the S-jets are stuck closed and cannot get fuel to Carb. Have to remove and blow out with air to get...

'32 Ford Roadster or Phaeton Stock Height Chrome Windshield Frame with Glass Installed and with Holes for Finger Pulls. This was made by Trautwein in 2005, and is Brand New and still in box. Also included is New Vintique Upper Windshield Stanchions. Email mbrock4914@aol.com for pictures. $700.00...

Are the wheel outer trim rings the same on a 60HP wheel (16x3-1/2) and a 85HP wheel (16x4) on a 1940 Ford? Thanks

$750.00 Free Shipping in lower 48. Email: mbrock4914@aol.com for pictures or questions. Thanks

All fabric parts needed to replace your top, cut and stitched to fit original frame assembly. Top pads and welting trim included. Rear Window Frame and Glass are installed into Top. Top Boot to cover the folded top included. This Top was carefully removed from a LaBaron Bonney Top Kit that was...

New LeBaron Bonney Rumble Seat & Back Cushion upholstered on New Coil Springs. New LaBaron Bonney Rumble Panel Set. Original '32 Roadster Rumble Hinges. Repo Rumble Seat Riser, Rumble Lid Stop Kit and Rumble Striker Plate. (706) 346-6575

How is a '32 Roadster Seat Back Cushion attached at the bottom to the body?? Thanks

I need some help in how to install the door glass in a '32 3-W. Thanks

What is the best rear window seal for a '32 3-W roll down rear window, and who has it? Thanks

Does anyone make a accurate reproduction of the Tack Strip for a '32 Roadster. Thanks

Does anyone make the 3 piece rear belt rail top wood tack strip that fits a original Henry '32 roadster? Thanks

What would be the best sealer to use when installing a new original style roof insert in a '32 Deluxe Coupe? Thanks

What type, size and how many screws are used to attach the package tray to the roadster upper back panel? Also, what type, size and how many screws are used to attach the rail (seat back trim) ***'y wood to the body? The Top Prop Rests (also referred to as Grab Handles) that rests on top of each...

Can anyone provide pictures of how the cloth welting is correctly installed on the #1 and #2 floorboards of a '32. In advance, Thanks So Much.

When disassembling a '32 column drop, how do you pull out the pin that moves the ignition switch to allow removing the sliding bolt? Also, who reproduces the most accurate switch plate and switch lever? Thanks

Can a original '40 Ford headlight dimmer switch be retained when converting to a 12 volt system? Thanks