Search results

Rear fender skirts for a shoebox Ford, 1949-1951. All steel, aftermarket skirts(no name on parts), Nice shape, no dents, rust, or scratches. Outside is painted maroon, backside is red oxide primer. Latches work well. Can ship, but size and weight may make shipping pricey.

One stainless-steel steering arm. !-3/4" drop, threaded female holes are 1/2'-20 thread, 3-5/16" apart, 7-degree tapered hole for tie rod end. has a stainless-steel tie rod that has a 9/16"-18 thread. Would ship USPS small Flat Rate box at $10.20.

Stewart Warner Tachometer # 82170. 0-8000 RPM, 3-3/8" diameter, electrical, analog, black face, stainless bezel, instruction sheet. Never used, installed only for mockup purposes. Buyer pays shipping.

Stewart Warner Deluxe Series Tachometer #82162B. 0-6000 RPM, 3-3/8" diameter, 270-degree sweep, 12v, black face, white numbers, stainless bezel, light, wiring, and instructions included. Electronic, programable. Will work on 4-, 6-, or 8-cylinder engines. Was in service about 5 years, worked...

Stewart Warner Deluxe Series speedometer #82896. Electronic, programable, 3-3/8" diameter, odometer, black face, white numbers, light, wiring, and instructions. In service for about 5 years, worked great. buyer pays shipping.

Need a set of rear bumper brackets for a 1964/1965 Falcon Ranchero or station wagon. There should be two brackets on each side fastened together. Standard sedan/hardtop/convertible brackets will not fit.

Anyone got a 42-48 Ford distributor around that they can take a look at the back side of the unit that faces the cam gear. Between the two drive lugs is a core (expansion) plug those seals off the end of the shaft. Inside the shaft is a lubrication wick and the other end of the shaft has a...

Looking for a usable oil bath air cleaner for my '50 Ford V8. Most important that the element is in good shape and cleanable. Paint condition and small dents ok. send pictures and price.

I have a friend who is looking to replace the front bucket seats in his 1930 Model A coupe street rod with a stock bench front seat from a Model A two door sedan. We willl need pictures and price. May be willing to trade for the buckets he has.

Covers Ford built industrial engines and Power units from 1948-1955. Has information on both flathead and OHV Ford 4, 6, & 8 cylinder engines, and the accessories used for these engines to be used as power sources for industrial applications. 270 pages. FoMoCo copyright dated may 1955, form...

Mercury chassis Parts Catalogue for 1954 and 1955 only. 415 pages. Final edition dated January 1956. FoMoCo form #MD-3671-55. Text and Illustrations. Covers wheels through accessories, includes front fender parts which Ford considered part of the chassis but no other body parts. Excellent...

1960 through 1962 Lincoln Continental Master Parts Catalog. Contains both Chassis and Body parts listings, Text and Illustrations. 466 pages. Revised edition dated October 1962. FoMoCo form # MD-8275-62. Excellent condition. Buyer pays shipping.

Have three Stromberg 97's for sale. Rebuilt back in 2001 by a local old Ford mechanic but were never used. All three were rebuilt back to original and have all idle circuits intact. Carbs were double bagged in plastic bags and stored properly since then. I was always going to use them on my...

Pair of 1937-38 all models and 1939 Standard model headlamp trim rings. Used, good condition, no dents, slight tarnish but could be polished out. Buyer pays shipping.

Glass headlamp lens, fits 1937-38 all models and 1939 Standard model. Appears new, unsure if NOS or reproduction. Has Ford oval and marked Twolite Headlamp & 81A. Buyer pays shipping.

Used Ford 9" Traction-Lok differential. Disassembled to inspect. Checked clutch pack clearance was correct with proper Ford tool. Unit appeared to be in good condition and used very little. Outer cases had some light surface rust so I cleaned them with Evapo-Rust which darkened the surfaces...

Brand new NOS inner distributor cap, Ford # 68-12116, and used outer cap #18-12105. Fits late 1936 to 1941.

Ford/Rotunda automatic transaxle service tool set for the ATX front wheel drive automatic transaxle used in 1981-1990 Escorts and 1981-1994 Tempo/ Topaz. 22 piece set. Set is missing 3 tools that I don't remember being something we ever needed back in the day. Otherwise set is in excellent...

Reproduction front seats springs for 1926 & 1927 Ford T roadster or touring car. Includes both the seat bottom and back rest springs. These are new springs that were purchased in 2012 during the construction of my T street rod but only used for mock up and never used in the final assembly...

Ford/Rotunda factory transmission service set T74P-7700-A for the 1974 on up Ford C3 automatic transmission. Set is in excellent condition, but is missing three tools: the long reach wrench for loosening the cooler line fittings in the chassis, the neutral safety switch socket, and two trans...