Search results

Has anybody installed this modification, 2 blind plugs that go into the holes of the bellhousing and that cover the transmission shifter-fork-shafts to stop the leakage of transmission oil into the bellhousing? I am asking, because at the other side, the shifter tower has originally a similar...

I am rebuilding my gearbox and ordered the 3 roller/needle bearings. I got one long and one short one as designed by Ford; the rollers are super smooth as you expect from needle bearings. They have smaller diameter ends that ride in holes in the cage. The cages are ground to a certain diameter...

I am offered a Model B cam. As I read that those cams can be worn down badly at the nose and not deliver the power anymore, I want to measure the lobes before I buy it. I found that model A camshafts give an intake/exhaust lift of .303” and model B camshafts give an intake lift of .334” and an...

I had a 1931 gearbox housing with a worn down cluster gear boss. I made a grinding/lapping tool to grind the surface flat and smooth again. I ground the boss back to accept a 1928 thrust washer. Henry skipped those and made the bosses taller at the end of 1928 to cut on cost. Luckily these...

Does anyone have experience with the 8HA or the Holley 647 with a cast iron downdraft manifold on a Model A?

A fellow Model A club member asked me to help him. Before I go over to his place I would like to get some input from you guy's. He recently bought a restored roadster from the US with lots of options added. It is only running on the second and third cylinder. It has a high compression head and...