Search results

I have a 1929 Fordor (60-C) and I have a dome light and an electric wiper. I'm trying to find out whether there were originally one or two wires that go through the clips under the gas tank, along the inside of the cowl and firewall on their way to the terminal box. I want to make this correct...

I'm making new floorboards and trying to make them to the original specs. The plate clips which rotate to hold on the shift lever plate came with rivets and washers. I believe I read somewhere on FB that the rivet head goes on the bottom of the floorboard. My question is: does the washer go...

The attached picture shows the rear bumper brackets on my '29 Briggs Fordor. As you can see, the left one goes straight out to the side while the right one is angled toward the rear. These are both the correct brackets, I think one is just a little bent. Which one is correct - straight or angled?

1928-1929 Ford Model A Sedan (Tudor or Fordor) fiberglass rear fenders. These fenders came off of my 1929 Briggs Fordor and are in very nice condition. They are selling new for $300/ea. They are painted black and have a few scratches in the paint which could be touched-up to go on a nice...

Does anyone know if there are NEW generator armatures available with the long (7/8") taper? For some reason, the big parts suppliers only sell the short (1/2") taper, which was only used after March (May?) 1930 per the Judging Standards. I'd like to make mine correct for my June '29.

There seems to be a lack of official information on the shapes and sizes of rubber body pads for wood-bodied Fordors. I'm putting my '29 Briggs Fordor (60-C) back on the frame and installing rubber pads that were previously missing. I bought a set of pads from Bratton's and it seems to be a...

I am putting together a transmission for my car and I would like the parts be painted (or not painted) as originally built by Ford. I can not find any reverences in the MAFCA/MARC Judging Standards or the Paint & Finish Guide that describe if the Clutch Release (Throw-out) Bearing Hub and the...

I need a nice 1929 front cross member so I can get my car put back together and enjoy it. It should have: One round hole and one oval hole for the starting crank Raised pads on each side where the radiator mounts No cracks or heavy pitting Prefer holes not to be excessively worn Your help...