Search results

1948 "H" Series 226 Flathead 6 Cylinder Here's a complete flathead 6 cylinder that came out of a super nice original 50k mile '48 Ford Coupe that was updated. I was lucky to get the entire drivetrain out of this nice original car. Plans changed, I'm moving the engine from storage and now it's...

SOLD Early Ford '37-'41 Round Back Spindles​ Matched pair of unmolested '40 Ford spindles. Just as they came off the front axle. I used to clean this "stuff" up, but I found there's some folks out there that want the 60+ year old look on their parts that can't be duplicated. Complete with...

SOLDEarly Ford Backing Plates​ This is a matched pair of front plates off a '48 Ford front axle assembly. Now take a close look here at the quality of these plates. These came off a low mileage coupe that got a IFS transplant. Preserved with a typical coating of 60 year old grease and dirt...

Sold 1940-48 Ford Front Hubs/Drums​ Here is a matched pair of NICE '40 hubs/drums. Both off the same axle from under a southern '40 Ford. No black spray bomb paint job here. Just minor surface rust. Complete with original screw in dust covers, good inner and outer bearings. Lug nut studs are...

'37-'48 Ford Front & Rear Hubs/Drums, Machined & Marked w/oversize, Wide 5 & 5x5.5 '37-'48 Ford Front & Rear Hubs/Drums, Machined & Marked w/oversize, Wide 5 & 5x5.5 Purging my "stuff" and have these for sale. [B]Note: The four hubs/drums in the front row are sold. I machined all on my...

SOLD Model A New Parts - Grab Bag Everything you see in the pictures is part of the "Grab Bag". Weather strips, seals, ignition parts, carb parts, starter switch, etc. Purging my inventory. I can use $50 more than I can use the parts. Inspect the pictures closely. Too much to list. Oh...

WANTED: 1953, 1954 or 1955 Lincoln Capri 2-door Hardtop Tell me what ya' have. '54 is my preferred year. Not looking for a $high$ #10 restored car. Also looking for parts and/or parts car. PH: 864-430-1932

WANTED: 1953, 1954 or 1955 Lincoln Capri 2-door Hardtop Tell me what ya' have. '54 is my preferred year. Not looking for a $high$ #10 restored car. Also looking for parts and/or parts car. PH: 864-430-1932

SOLD '40 Mercury Clutch & Brake Pedal Assemblies Here's two early Mercury pedal assemblies. Both are the same. One has no rubber on the clutch pedal pad, one doesn't, so this way you can tell which is which in the pics. $85 each or buy'em both for $150. Either way, you pay the...

SoldNOS Flathead Pistons w/Pins Set #1: 3 1/16" + .030, 4 ring, Sealed Power brand. $100 Set #2: 3 1/16" + .020, 3 ring. These have a FoMoCo cast into the piston. I think they are O.E. Ford pistons and then have the Triplex private label pasted on the other end of the box. $100 Buy both...

SOLD New or Rebuilt Flathead Ford 6 Carburetor Either a new or rebuilt Holley single barrel carb for a Ford flathead 6. Everything moves free. Minor surface rust on a few of the bare metal parts. Everything moves free. Nice carb if ya' need one. $65 + shipping SOLD - SNAP-ON Magnetic...

RHDrive Early Ford V-8 Column Shift Transmission & RHD Clutch/Brake Pedal Assembly SOLD Early Flathead Ford RHD Transmission Here's a good one for you guys with the steering wheel on the right. Here's a rare piece that Ford made for export vehicles. The main case is an earlier Lincoln...

SOLD '39 Ford Clutch & Brake Pedal Assembly Nice pedal assembly. Not rust pitted. I'd install bushings, but useable as is. Originals are getting harder to find. $195 + shipping Attached Thumbnails

SOLD '40 Mercury Clutch & Brake Pedal Assemblies Here's a pair of early Mercury pedal assemblies. Both are the same. One has no rubber on the clutch pedal pad, one doesn't, so this way you can tell which is which in the pics. $125 each or buy'em both for $200. Either way, you pay the...

SOLD Early Ford Clutch Pedal Arms One with the link attached is Part#51-7520, 11.5" from pivot hole to pedal pad hole. Other is Part#40-7520. It measures 14.5" $35 each or both for $50. Either way, you pay the shipping. Attached Thumbnails

SOLD '38-'39 Ford Tudor Standard Door Garnish Mouldings Not bent or rusty junk. Clips for window fussy seals are still in place. Pics tell the story $85 + shipping Attached Thumbnails

SOLD '33-'34 Ford Clutch Brake Pedal Assembly Clutch Brake assembly that's '33-'34 Ford. I'm not sure if it's car or truck. Maybe the BARN old Ford gurus can ID it. Part# on the mount is 51-2467. Can't read #s on the pedal arms. Gotta' be worth $135. If not, make an offer. Price + shipping

'56 Ford Passcar Defroster Ducts Here's a complete set of defroster ducts I recently took out of a '56 Tudor sedan that I'm restoring as a vintage oval track race car. Two or three studs broke off, otherwise in good shape. $25 + shipping

SOLD NOS Rebuilt/New Stromberg 97 Here's a NOS Rebuilt/New Stromberg 97, including the box it came in. Says rebuilt on the box, but it looks new to me. Has the vacuum port in the back and a choke cable bracket. I'm pretty sure this was a replacement carb for a '49-'53 Ford flathead. Has...

SOLD '59 Ford Truck Grill I say NOS because it's as close to NOS as you'll ever get without taking it outa' the shipping box. Here's the story on the grill. A guy buys a new '59 Ford truck with a painted grill. He immediately orders a chrome one and swaps grills. The painted one goes in...