Search results

Does anyone sell just the exhaust pipe without the muffler? thanks nick c

Anyone from the FB other than me participate in the parade? I took my 29 AA, it was fun.

test

test

test

I have the plug adapters so I can use 14mm plugs, the plugs need to be 3/4" long and resister type because I have a radio, I tried autolite 404 but there are too sootey. What plug should I use?

Does anyone make a rear fender patch for the model A, its the rear part of the rear fender where it sweeps to the rear. thanks

I'm finished with the restoration of the cab, the original door seals were windlace, has anyone here used weather stripping instead, if so which one did you use and where did you get it? thanks nick c

28-29 ccpu cab corners good condition 2 for $200, 2 brass door handles 28-29 Fordor $40.00, Generators and starters $25.00 ea., Model AA bell housing $100.00, Model A 3 spd bell housing $50.00, 28-29 steering column $100.00, 3 spd. trans. complete except for 1 tooth broken on cluster and stick...

I read on the FB you align the hood first, then the doors, I placed a 1/4" shim under the front cowl bolt and it aligned the hood perfect with the rad shell and the cowl. I hung the doors and the backside of door is now 1" too low. Need suggestions on what to do now. thanks nick c

I have Vintique electric wiper, the weak link in the kit is the wiper arm. In Mac's catalog I found a wiper arm that looks well made, pg 174, B17509ES, has anyone here ever bought one, how did it work. thanks nick c

I have a 12v alternator and batt, on my 29 AA, I bought 50/32 bulbs, one filament comes out to a point, the other goes straight across, which one goes on top? thanks nick c

I'm making my own wiring harness, how do you run the wire, when it comes thru the rad. shell, does it go down to the cross member and under the lower rad. hose, and what hold in place in the cross member? thanks nick c

I have a vintique wiper motor install kit I bought 8 years ago but not sure how it goes together. From what I've read they are junk but would like to try and make it work. The motor shaft has a hole drilled through it, what goes in the hole and the shaft has a groove in it near the hole what is...

I bought a sun visor cover from Mikes for an original frame, the frame has 2 tabs sticking up on each side, do they poke through the cover, then is there a sheet metal strip that goes over the tabs and gets bent down? The kit comes with 12 pic's and instructions, the first instruction says...

I bought the 3 piece set about 3 yrs ago, they were 12" long, they were junk right out of the box, who sells decent 3 piece head lite, horn conduit sets. I noticed that Macs sells a 2 piece set that are 18" long for 28-31 pu, why so long? thanks nick c

I've done a search and read, good info. The frame is sandblasted, primered and painted, new glass, just received bedding from mikies, cork- rubber 1/16" thick, one side of tape has a woven clothe finish and the other has a diamond pattern. Which side goes to the glass? thanks

Should I run the hidem all the way around the roof or should I stop when I get to the gutter? thanks

Bought 2 new hood shelves for 29 ccpu, all the holes line up front to rear except one, its the second one from the bumper, its for a AA truck, has anyone had this problem and how did you solve it. I bought all new glass and want to tint before install, Walmart has it, comes 5*, 20* and 35*...