Search results

The items in the top two rows look like Front Hub Bolts but do not have a shoulder for swedging. Threads are 1/2-20. Length of threads is.625. Length to under the head is 1.045. The lower row have 7/16-20 threads with a length of .625 to under the shoulder. Either set or both sets are free but...

All of the venders appear to sell the same positive to starter battery cable. Snyders is the only one that lists the cable as 2/0. I don't believe that is correct. Can anyone verify if the cables sold are #1 or 1/0? Thanks, Dave

Anyone have 3 Lock-N-Stitch C1A Stitching Pins left over from a repair job? I used 150 pins on a repair but I'm 3 pins short. Lock-N-Stitch is currently out of stock with no ETA on more. Thanks, Dave

Flywheel housing has had cracks welded. Would be great for a display engine. Free, you pay shipping. Weight from 95370 is 23 pounds. Local pickup also.

1929 Transmission $350.00 Please read attached PDF for condition. PM with questions or more pictures. I only check for messages once per day so it could be a day or so before I answer.

Attached are pictures of the passenger side rear pillar of my '31 Closed Cab. As shown in the pictures a lot of rot on the lower portion. The drivers side was even worse. I made a stamping die to re create the damaged area. In the last picture my question concerns the circled area. Does this...

Two NOS U Joints. These were in a box of Model A parts that I bought. Hand written on the box is "Ford 1964 T Bird" but I'm sure they will fit other applications also. Pat number on boxes is AE-530. One box is missing a retaining clip. $15.00 for the pair plus $10.40 USPS shipping.

My '31 Pickup has a fully built touring engine with hardened exhaust seats. I'm now rebuilding my wife's '30 Coupe which will not be a touring car but rather just used for short trips. Are hardened exhaust seats necessary? Thanks, Dave

1928 Transmission Please read attached PDF file for complete description of condition. More pictures available on request.

Sold

When I try to add pictures to a "for sale" post I get a message saying I'm not logged in when I am logged in. Even if I log in again it still will not let me add pictures. I have added pictures many times in the past without any problems. What is the problem now?

After searching all of the suppliers catalogs and calling most of them I can not find the correct Shift Fork Shaft (A-7240) for Low and Reverse. All of the current reproduction shafts have machined ramps between the detent grooves. Does anyone know where to buy the correct style like Henry made...

As with most aftermarket parts I have sanded a little bit off of the A-7095 U Joint Retainer Washer so that it will sit in the recess of the U joint knuckle. My question is when the knuckle slips on to the A-7060 Main Shaft there is a gap of about .060" between the shaft and retainer which would...

SOLD June thru September 1928 Accelerator Assembly Frame has been bead blasted and powder coated. Bell Crank / Accelerator End and Throttle End have been bead and powder coated. The center portion of the straight rod has been bead blasted and wet painted for assembly purposes. Spring has new...

SOLD A-4513-BR Universal Joint Housing Cap Inner This is the Inner Cap for 1928-1929 U Joint with the unequal hole spacing. Minimal wear marks on the outside surface. Holes are not egg shaped. Shipping via USPS Padded Flat Envelope $9.65

I need a Model B Distributor Plate made by Standard Products. The plate will have an SP with a circle stamped on it.

I was able to drive my not finished '31 CCPU today. The last time I drove it was 1966, just before the Navy took me to far and interesting countries. The truck has been in storage and in pieces since then. I had started to restore it while in high school but never finished, then after the Navy...

This switch was in a truck load of "A" parts that I bought. I'm sure it is not for a model A. Can someone identify what make of vehicle and what year it is for. Thanks in advance, Dave

Excellent condition with all new "D" Nuts. Heater hole position matches the Autolite Heater which is included. Email or PM with questions. Shipping via UPS to be determined by location.

Sold