Search results

Trying to locate a place that has ign parts. I need a crab style rotor button for a 46 48 ford dist. Thanks, jim

Wanted a set of rear radius rods for a 42 48 ford. Price please. Thanks, jim

I need 2 5 on 5.5 spacers 1/4 to 3/8 would be fine. Price and Pics to 31088 Thanks, jim Found

I would like to purchase a 7-degree tapered reamer. Pics and Price. Thanks, jim

Anyone know what brand, or where to get a ford starter solenoid with the button on the bottom for bumping the eng over? Thanks, jim

I need a set of 48 52 front upper shock mounts. LMK what you have. Thanks, jim

Hi all, I' looking for 3 sets, 6, model a tie rod ends. FOUND. Thanks, jim

I need to know the correct thread size of the model A tie rods. I have checked and one post says 11/16x 18, another says 11/16x 24. Left, and right. Please someone help before I buy the wrong tap and die. Thanks, jim

I have assembled my 39 top loader out of parts, never having a complete trans. The trans mount, which I call the bat wing will mount in 2 different ways. It's not centered. Which way is right? Mounted in a Model A frame. Thanks, jim

Could someone tell me what model my eng is. It has been modified, but here are the numbers *1865789* Thanks, jim

I am in need of the correct bolts and coupler for the rear of a 39 trans .I have converted a 39 open drive to a closed drive, and need a bearing retainer and the coupling to a closed drive. Pics and price to jelyle@cox.net. FOUND jim

What is a good 12 volt elect fuel pump, 2 to 3 psi? And regulator if necessary. Thanks, jim

Having trouble finding a clutch disc for my model A .Anyone have a new one, or very slightly use for sale. 10 spline. Thanks, jim FOUND.

Rebuilding a stock model A ft spindles and bushings. There is a 3/16 to 1/4 space between the assembled spindle and the axle. It is at the bottom of the spindle. There should be a shim/washer there. I do not have one in my kit. The old parts did not have one either. What to do? I'm new to...

Anyone have a couple of 5.50/6.00x 21 tires? For a speedster. Thanks, jim

I would like to buy a large, 4,5'' temp gauge. Would like mechanical, but if right will take electrical, with sending unit. Pics and price. Thanks, jim

WTB 48 52 F1 trans crossmember Wanted 48 52 F1 trans crossmember. Price and pic to 31088 Thanks, jim

I need 2 of the body mounts that attach to the frame for the cowl. 3 rivets to the frame and 2 bolt holes for the cowl. This is where you get your A pillar right. Mine are too rusty, holes, to repair. Pics and price shipped to 31088. Or a supplier that has these. FOUNd. Thanks. Thanks, jim

I have an 8cm eng. I did not get any clutch components with it. How di measure the pressure plate size? NAPA says it is a 12''. when \I start looking for parts they are all 9.5. Please help. Thanks, Jim:o

I need a part number for a fan belt for a 5/8 wide belt. 39 48 ford single belt configuration. Thanks, jim