Search results

I am looking for a headliner for my Model A 170B 4dr. Who can you recommend from personnel experience? dlhosenfeld@gmail.com

Is there only one manufacturer for Model A rims? Or supplier ie Coker?

I have a 59AB engine in my 34 BB stake truck. When I bought the truck It came with a lot of extra parts. The fan and gen were not on the engine. I put a generator with a fan on the engine and drove it this past summer. Didn't really cool that well. In my extra parts, I have a double pulley for...

Does anyone know if the victoria assoc is still active? If so does anyone have a contact I could call.

Has anyone one replaced the original air tube system and gauge with a modern float system? If so did you install a float from the top or bottom of the tank. I know its not original. My original fuel gauge is rusted out. I could just make up a wooden stick to check the tank, but would like a guge.

Looking for a good fuel gauge for my 34 1 1/2 ton truck. Gauge will have an airline going to tank.

Looking for a BB wiper motor in good shape. PM me donh

Looking for 3 lens retainers for a two light headlight. I tried a few suppliers but their retainers are differrent. It is not Model A. I am guessing it is a 34 as it came with the parts for the truck. Headlight is marked Ford two light.

Does anyone know where I can purchase new 650-20 tubes for my 33 BB truck? I need 4. Coker doesn't have them and neither does Universal tire

I am working on a 31 roadster that doesn't have a windshield wiper. What came on it? What would be the better choice to use?

I purchased a truck that had a 59 engine . I'm trying to get it running. It has the 59 water pumps. I have inserted spacers under the water pumps to raise the front of the engine up. It is still not high enough to put a double pulley at the crank. Do I need to change to a different water pump...

I am looking for a good intake and exhaust manifold for my 33 BB truck without any cracks.

I have looked at past threads about this but need a little clarification. What shape is the bolt I need to drill out? Is it tapered or some kind of step? I assume it goes all the way thru the column.

Anyone have an update on the pending legal action in CA?

Looking for the fitting that attaches the vacuum line to the tower of the intake manifold. Has 7/16-20 thread on one end and hose fitting on the other. Or is there something else that will work.

Looking for a 20 inch 2 piece rim for a 1 1/2 ton truck. Needs a 5 X 4 3/4 bolt pattern and be in good shape.

I have a 34 truck with water pumps in the bock. I would like to determine what year it is. Is there a serial number on the block? and where is it?