Search results

I was recently given a set of new Mud Flaps for my '31 CCPU Apparently mounting brackets for these are not available thru the normal Model A vendors. Any suggestions?

I am in the process of installing electric wipers in my pickup. Only problem I have had so far is how to route the electricity up there. When I bought the pickup it had a manual wiper on it, so there was no clear path of where to route the electrical wire for the new wipers. Any suggestions?

Thought of Tom when I saw this:

Almost every time I google one of the part's houses, (such as Snyder's as I just did), the first thing that comes up in that search is Mac's. Grrrrrrrrrrrr!!! :mad:

Are there instructions somewhere as to how to complete these:? http://www.ebay.com/itm/1932-Ford-3-Window-Coupe-Sun-Visor-Mount-Bracket-Kit-32-/350409607806?_trksid=p2141725.m3641.l6368

Has anyone converted their headlights to LED, and if so, what did you have to do to make it happen?

I have a genuine HP Notebook battery -- new in the box FREE to any Ford Barner (in the USA) if you can use it. It is a MU09 Long Life Battery I have no idea which computer it fits, I thought it fit mine, but doesn't and HP won't take it back since I waited till mine died to find out it was the...

Saturday, September 24, 2016

Saw this at work today:

Anchorage, Alaska 2016 https://www.youtube.com/watch?v=odke6TnxOSg Model A's lead off the Antique Autos, mine is the 3rd vehicle.

Henry (HL Chauvin) suggested I post the preliminary results of my new Model A Radial Tires: I only have about 100 miles on my new Radial tires, but OH, MY, what a difference. Our paved roads here in Alaska are quite rutted unless they were freshly paved in the last year or so. With the bias...

What is the best sealant to use on fuel line fittings. I especially need something that will work on the 3/8 NPT fitting between the tank and shut-off valve on a late '31 indented firewall.

I'm installing new rubber on the stock rear motor mounts. I bought new rubber and the bolt/bushing kit to install them, but am having a problem getting the bushing to seat into the rubber. I can get it in one side, but then when I try to get the other side it (with the frame in between) it just...

My company upgraded my work computer to IE-11. Now I can't open the thumbnails that are posted. The thumbnails show OK, just won't open when you click on them. Just gets a black image with the little circle going round & round. Anyone else have that problem? Oh, and unlike home, I don't...

I am contemplating having my oil pan powder coated (just the outside, mind you). I've got the engine out of the car right now, so would be the perfect time to do that. Just wondering what the consensus of the group is toward powder coating the oil pan.

Where would I look for the VIN number on a '53 Convertible?

Does anyone make such a thing? Due to space constraints, the valve cover filter will not work. Any suggestions?

Is there a typical way this is done? The header has a 3-bolt 3" flange with an adapter that takes it down to the 2" pipe. But how is this then connected to the muffler pipe?

What is the best cure for a door (Driver's) that sags enough that it won't latch properly. Lift up on the rear of the door while closing it and it latches good. It is about 3/4" lower on the rear than is the door on the passenger side just judging from the way the belt rail with pinstripe just...

After a 9-month hibernation due to a couple of valve seats that came loose 600 miles from home, I finally got everything back to gather just in time for our first official outing of the season. Got everything finished up around 8:30 Friday night in time for a 10am Saturday departure. Not a real...