Search results

hello everyone, I enjoy searching the forums for answers, but I am having trouble installing my graphite rear main seal in the engine while it is still in the truck. I removed the rear cap and was not able to pull the new seal through. I then loosened the other two mains in attempt to drop the...

our 46 ford pickup has a warped bottom centre pulley, that we assume is attached to the crank shaft. the front centre of the pulley seems to have a connection in it used for hand cranking or starting the motor... i was expecting to see bolts there. was wondering if anyone has any tips or knows...

hey guys, Me and my dad are still working on our 46 ford. We've been going to car shows and cruise nights and we've seen some of these 46 pickups lowered. We like the look, but we want to keep the chassis, body and frame original. We were looking through some of my dads old car magazines and...

does anyone know a cheap and simple way of lowering the stock suspension on a 46 ford pickup?

we took the box off the frame because it was just on loose and after tightening up some oil line connections that leaked we decided to try and put our 46 in action! Here are some pics of us driving it around the backyard.

here are the pics several of you guys asked for. i took these about 3 weeks ago. thanks for the idea oldford2

hey guys i just thought i'd tell you that me and my dad started our 46 pickup! we cleaned the lines, emptied the old gas, cleaned the carburator and the sediment bowl, and we put new spark plugs in it. We started it several times and in the end it was idling on its own before we shut it off...

we can't seem to get the oil pressuer gauge in the dash to show a reading. We bled the line from the filter to the oil pressure gauge sending unit in the block. THat line is clear. When we crank the motor oil bubbles up in the oil filter when we hav the top off. does this mean that we have...

hey me and my dad just looked at the oil gauge and its not reading. we're getting oil from the filter down to some part at the bottom. is the oil gauge here. what do we need to do to get it to read properly.

we bought a new 6V battery and without thinking hooked up the negative terminal as a ground, but it was supposed to be a positive ground. It still turned over and gave spark. Later, we switched the ground to positive and had the same results. could we have damaged something in the electrical...

anyone have any parts for a 46 ford??? a right side rear fenders, chromed grill pieces, hood piece. also need bumpers. thanks

anyone have any parts for a 46 ford. a right rear fender, any chromed pieces especially the grill, hood piece. also need bumpers. thanks

hi, im new to the website. me and my dad just got a 46 ford pickup with a V-8 in it. the engine turns over but doesnt start. we got some spark out of the coil and we checked one of the spark plugs and got spark out of it. what should we do to clean up the engine a bit and get it to start.

hi, im 14 and me and my dad just bought a 46 ford pickup. the engine turns over but does not start. we got some spark out of the coil, and we checked one of the spark plugs and got spark out of that two. Any suggestions on what to do to clean the engine up a bit?