Search results

contact for details, non running, parts collection, not going to complete build , titled, non op. prefer local .(714)659-7825

still for sale is the same old item. it is a 1929 model a ford station wagon. few of you know where this differs. it has attached to the stanchion a vertical piano hinge to receive the wood body. it has an extra rear leif to amount for the weight of the wiod body. the area on cowl to receive...

im searching for a 4 and 3/8" diameter by 3/8" v belt pulley to fit onto a reconditioned cardon emisions air pump. pulley only thanks. should have a 1/2" center bore with three 3/16" mounting holes . unsure of those correct specs. required for visual to smog in california. function is to...

i need to get this item out of the way. it is dismantled mostly. it was a doner car and has become a parts collection for me. i'm not getting anywhere fast enough with this project and now i think it's best it goes. $2,500 plan on assembling everything. ca.title non op.

this october 29 150A station wagon is for sale. it was a scavenged parts car when I bought it. i rolled into the yard and mostly dismantled it with intent to restore to driving condition, i've acquired a motor from a 31AA that needs a rebuild along with many other various A and AA parts . no...

http://www.auctionbymayo.com/index.php? subp=1&sct=&pg=ap&pid=23883http://www.auctionbymayo.com/

i've got a '29 a, with the button, rod, pawl, spring and pin missing. and i have a '31 aa, e brake complete. i see the length is different as well as the pivot, i have not removed any internals from the '31 and don't plan to. i can not tell for sure if the later will drop into where the...

i just picked up an AA motor #AA4467774 and it's transmission attached. no carburetor, starter or generator. i'm thinking that i could use those from the '29's A922804 motor since it's beyond repair. will i run into any obstacles ? i think i'll hold onto the clutch assembly and...

okay, i've had it. i've dismantled what there is of this car for what now appears to be research. no development. i have a 1929 with some swapped parts little by little i gain the courage to do something on it to progress and the setbacks keep me discouraged so i procrastinate. i set...

this seems simple enough. while flipping through some catalogs, one states their mounting bracket is chamfered and priced a bit more. another catalog specifies a round ball shaped bushing or brass cup . then there is the bolt sets why is a set of 6 pieces $1.90 and another's set of 18...

today i over heard mention of the G28 motor. i'm wondering if anyone has something to say about it. in regards to comparative specs and functioning abilities. thanks. here is one search result...

http://www.ocregister.com/news/time-315437-santa-cars.html

i read it on the H.A.M.B. http://www.jalopyjournal.com/forum/showthread.php?t=604059&highlight=hill+climb

i picked up a few back issues of "the restorer" and noticed the "matching model A paint colors" . wondering if anyone has one with a "manilla brown" write up, i'll be looking for that issue. what ever volume,issue,month and year it may be. i see the formulas are pretty much spelled, i'd...

who is replacing with what ? before i put the splash shields back on, maybe i should replace the two grease fittings on the frame. i did a search on this topic to no avail. proper way to remove, can i just tap for a small fitting or resize the hole and tap for...

i've acquired a set of decent wood base blocks for my '29 cowl both are slightly thicker than the metal channel so i plan to sand the flat side a bit to fit. i can't tell which but either the top side or bottom side of these wood blocks are tapered, concave maybe to ease the install. if...

Looks like the So. Cal. Woody Club is having another gathering . Saturday morning 4/16/2011 8 a.m. Dana Point Harbor . http://www.socalwoodies.com/doheny.htm just throwing that out there .

i've not looked close enough yet and when i received my '29 everything was loose, now it's dismantled. in looking at many photos shot at the rear i notice the floor at the inside rear fender is tapered. i've been under the assumption that those fenders will fall into place by paralleling the...

I know many of you send it out to the pro. with a delicate touch . I'd just like to know if you do take on this task , is wax an obvious to fill in the trough before enamel , is it wise to prime this piece and how much clear for depth to the finish .

heads up . some local items selling , not mine but looks good . http://orangecounty.craigslist.org/pts/2263790287.html http://losangeles.craigslist.org/wst/pts/2261469871.html