Search results

What size shaft is the 6 spline early 28 steering wheels? I need a new wheel for my 36 Fordson model N and it has a 7/8 6 spline shaft. Thanks.

Looking for a fog light, a Model 85, made by *** light company Los Angeles, CA. Has a amber reflector with a clear lens and a Mazda bulb. Looking for one to match one I have already.

I thought this was interesting. It’s a period dash mounted rheostat that controls the voltage from the 3rd brush to the field windings. It acts as a remote third brush adjuster. A manual voltage regulator...

Does anyone know if James Peterson is still doing his voltage regulators? I emailed him the other day but haven’t heard anything back yet.

Does the block have a counter bore for the gland rings like the exhaust manifold do? My block doesn’t show any sign of any counter bore.

Is anyone producing voltage regulators any more? It looks like Fun Projects are out of business and I haven’t seen any recent posts from Tom Wessenberg.

What is the best way to pull the GAV seat to clean under it on a Model B carburetor? I read where to use a 1/4-24 tap to pull it with.

Will a 31 boot fit a 29?

I'm planning on getting spare tire covers for our roadster. Does anyone have a picture of sidemounts with tire covers and a ******** mirror? The strap will partly cover the Ford logo so I'm thinking of getting covers with no logos.

I’m rebuilding a Model B carburetor that I acquired a while back. I noticed someone has driven a brass plug into the port in the casting at the throttle shaft. This port is supposed to open to atmosphere when at an idle and stop the power tube from drawing gas into the throat. The brass plug is...

Looking for a Model B intake.

I am going thru my brakes and I noticed the lug bolts on the rear hubs are welded in. I have to replace my drums so I guess I’ll be looking for another set of hubs. Is there anything I need to watch for when picking up used hubs?

I have my u-joint out and there is axial side to side play on both axis of the joint. There is at least 1/4 inch or more sideward play. Is this normal?

Snyder’s 6:1 head combustion chamber I was looking at an older Snyder 6:1 head. The combustion chamber was a heart design like their 5.5:1 heads. Their new 6:1 heads have a different modified heart design. Did Snyder’s change their 6:1 chamber design or was the one I was looking at a 5.5:1?

Looking for a 1929 roadster top boot. Either tan or black.

I'm looking for a 6 volt Borg Warner overdrive solenoid.

I'm looking for a 6 volt Borg Warner overdrive solenoid.

Has anyone ran the pipe with the temperature sending unit fitting and the thermostat at the same time? Is there enough room between the outlet at the head and the radiator to fit both in?