Search results

#3 Cylinder has a Skip when running. I changed plugs. Still have a Skip No water in The Oil, and No Oil in the water. Any suggestions on what might Be the skip when engine is running Thanks, HS

Howdy, I have adjusted my front brakes. Out on a test drive, I did some panic stops, the car stops great but the drums seem pretty hot. (150 degrees) I have cast iron drums. I'm using a Digital Thermometer check the Drums after a test stops. My question is How hot is too hot...

A couple of days ago, I noticed the speedometer in my 28 Phaeton swinging wildly between 0 to 30 as I was first driving out my gravel driveway slowly in first gear. By the time I got to the paved road (about two tenths of a mile) and increasing my speed with pressure on the gas pedal , the...

Just wondering, are the New Kings pins we buy from our Vendors Maked at all as "Left" and or "Right"? I have a older repro and only One of the King Pins are marked with a "(R) is that the case on all King Pins, Oh MY drivers side locking pin is in there Tight/Tight may be stuck? Not...

I need some help. How do I attach the Metal Belt rail on to my 1929 Sport Rail. The inside /Anchor Belt rail has small holes drilled every 1 inch or so. That will hold the outside metal belt Rail that will snaps into place. I assume that these small holes hold the inside/Anchor Belt rail...

On The install of the Metal Sport Coupe belt rail--- Is the metal Belt rail molding that put on first or is the Rear material /fabric covering of Wood Tack Rail put on first and then the metal Belt Rail? Thanks, HS

Now that Le Baron Bonney(LBB) is gone, Where can I find a top Kit for my 36 Phaeton? I also want the correct material , I'm not sure of the Correct name of the Material , I think the correct name for the top material is Drab Double texture Top Material but its the Type of Tan with...

I have a Brumfield 7 to 1 Head , I love it! My head has a recessed Plug hole (my fault ). Its really been a GOOD one. However, I have been running a Champion W14 has been on the colder side, any suggestions for a Hoter plug. Champion W16Y, Motorcraft TT10 etc, etc Larry if you are...

Good Morning, Adjustable Vale Lifter: Question, I'm using the One nut Adjustable Valve lifters The self Locking Tappets Adjustable Vale Lifter From Battons Part # 9150 How do I SET these ??? How do I adjust that lifter? The "self locking" has me Corn fused! Thanks in...

I Just purchased and installed a New Berg Radiator. wow nice. Took for a test dive, It really runs cool. What cocktail/Radiator fluid, what would you recommend. I'm running Distilled water and NAPA 1300 Rust inhibitor for spring and Summer. Thanks, Hugh

I guess I'm going to bite the Bullet and finally replace my old and tired 1928/29 older reproduction radiator. It has been a good one, been across the USA and back but at this point its time for retirement. I'm looking at two Radiators, Berg's and Brassworks. Both are quality items...

Can some please tell me, For the life of me I can't remember. Im getting old and just can't remember. Which WAY DOES THE Fel Pro COPPER CLAP HEAD GASKET GO ONTO THE block::: Do Seems go up or Do the Seems go down onto the engine block Thank You in advance , Hugh

After 15 years, I have seem to have blown with my Copper clad FELPRO head gasket. (between #3 and 4 Cylinder) Engine gases now appear to be leaking into the Radiator water. Will The "new" head gasket " Black" in color work with my Brumfield 5.9 to 1 High Compression...

I just read today's Morning Hemmings On-line report- Wow!! Lebaron Bonnet closer as of Last week going to file Chapter 7 .. alot of Model Aers have used LBB!!! What a shame, I hope someone can it the company started up again!! I hope! Hugh

Howdy, Who might have a excellent rebuilt 7 tooth (1928- 45 3/4" horn Rod} Who would you recommend. Need one soon, All my best Hugh :) hugh1928@gmail.com Virginia

My right front inner (the larger)wheel bearing has been Peened to the front spindle. What is the best way to ensure that I have enough grease loaded into the bearing, as I can't remove it from the spindle? I have used needle adapter for my grease Gun-- seems to work Thanks for your Help! HS

Hi all, The Owner's manual Indicates that the Oil Pan capacity of 5 Quarts of oil. How much oil do I add on a oil change, How much oil is left/remains in the dipper tray? Don't want to over fill. I'm not sure my dip stick is correct? Thanks HS

I go out to the garage and try to start my 36 flathead engine today. Last time I started the engine was several weeks ago and it started up but now NO fire, Engine just spinds? (It has a good battery) I'm Not at all familiar with the V8 Distributor and coil mounted in front of the engine?(...

I Would appreciated any tips on the correct way to install the side curtains on my early 1931 Woody Station Wagon. How do I make sure they are all tight and staright ???? There are, at last count I believe 90 eyelets in the curtaions and 90 studs in the side of the wagon! Seems like a...

Hello, I just finished my 150B, early 1931 Station Wagon. Can anyone Please help me out, I need ( can't find a Good set of Snaps/eyelets) to find a set of Cinch stud and eyelets for the side curtains. Most of the ones I have seen that and are on the market now are really of a Inferior...